Canon REALiS WUX500 D Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 72
PC-free multi projection, Mode setting, Layout pattern setting, Destination projector setting
View all Canon REALiS WUX500 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Menu Description PC-free multi projection > [Input settings] > [PC-free multi projection] Specify settings when projecting images on a USB flash drive to multiple networked projectors. For instructions, see "Using PC-Free Multi Projection" (P147). Mode setting Specify the mode for PC-free multi projection: Master*1 or Slave*2 mode. *1 Connect a USB flash drive and stream images for projection to Slave projectors. *2 Project images streamed from the Master projector. Option Off Master Slave Function Disable PC-free multi projection. Projection in Master mode. Projection in Slave mode. Before specifying the mode, confirm that you are using a wired network connection and that [Network (wired/wireless)] is set to [On/Off] or [On/On (Pj AP)] (P112). Layout pattern setting Specify the total number of projectors and the layout pattern (P148). Option Function Total number Specify the total number of projectors, including all Master and Slave projectors. 2 - 9 projectors can be specified. Layout pattern Select a layout pattern. Images from the Master projector are streamed to the upper left in the layout pattern. Destination projector setting Specify IP addresses of projectors set to Slave mode. Option Function IP address Enter the IP address of destination projectors. The projector in Master mode is identified as [1]. The wired IP address specified in [Network settings] is displayed. Confirm Stream projection to the Slave projector with the corresponding number (2 - 9), as specified in the IP address field. Enter Confirm the IP address of destination projectors. 72