Canon RP10 for CR-120/150 imageFORMULA CR-150 / CR-120 User Manual - Page 39
AA BB CC DD EE AA BB, Network Setting], mDNS Setting]
![]() |
View all Canon RP10 for CR-120/150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
• When searching for scanners on the network to select a scanner with Scanning Utility, the Scanner Name is displayed here. For details, see "How to Use the Scanning Utility" on p. 28 [mDNS Setting] [Network Setting] A A B C D E [DHCP] A Check (ON) to automatically assign the IP address of the scanner. [IP Address] B Set the IP address of the scanner. [Subnet Mask] C Set the Subnet Mask of the scanner. [Default Gateway] D Set the Default Gateway of the scanner. [OK] E Click [OK] to send settings to the scanner. B [mDNS] A Check (ON) to automatically search scanners. NOTE If not checked (OFF), enter the IP address of the scanner when selecting a scanner in Scanning Utility. [OK] B Click [OK] to send settings to the scanner. 39
![](/manual_guide/products/canon-rp10-cr120150-imageformula-cr150-cr120-user-manual-c5d640a/39.png)
39
• When searching for scanners on the network to select a scanner with
Scanning Utility, the Scanner Name is displayed here. For details,
see “How to Use the Scanning Utility” on p. 28
[Network Setting]
[DHCP]
A
Check (ON) to automatically assign the IP address of the
scanner.
[IP Address]
B
Set the IP address of the scanner.
[Subnet Mask]
C
Set the Subnet Mask of the scanner.
[Default Gateway]
D
Set the Default Gateway of the scanner.
[OK]
E
Click [OK] to send settings to the scanner.
[mDNS Setting]
[mDNS]
A
Check (ON) to automatically search scanners.
NOTE
If not checked (OFF), enter the IP address of the scanner when
selecting a scanner in Scanning Utility.
[OK]
B
Click [OK] to send settings to the scanner.
A
B
C
D
E
A
B