Canon RP10 for CR-120/150 imageFORMULA CR-150 / CR-120 User Manual - Page 45
Using Ultrasonic Double Feed Detection, Placing Documents
![]() |
View all Canon RP10 for CR-120/150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Using Ultrasonic Double Feed Detection The double feed detection function that the scanner is equipped with uses the penetration of ultrasonic waves to detect when two or more documents are fed at the same time. If false detections happen too often, disable the double feed detection function. NOTE When Using the Accompanying Scanning Utility for CR-120/CR-150: You can disable the double feed detection function to push the Function Button. When the function is disabled, the light of the Function Button is off. Placing Documents Note the following points when placing documents on the scanner. • Place the document so that the side to be scanned faces the side shown in the figure below. • A maximum of 150 documents can be loaded at one time (80 g/ m2 (21 lb bond)). Make sure stacks do not exceed 15 mm (0.59") in height (including curling). • Additional documents can be placed while the machine is scanning. IMPORTANT • Align the documents and set the bottom of the documents level in the document tray (Document Feed/Eject Tray). • Do not exceed the load capacity when placing documents. • Removing the Eject Stopper If the document exceeds 228 mm (8.98"), remove the eject stopper. (See "Remove and attach the Eject Stopper," on p. 24.) 45
![](/manual_guide/products/canon-rp10-cr120150-imageformula-cr150-cr120-user-manual-c5d640a/45.png)