Canon RP10 for CR-120/150 imageFORMULA CR-150 / CR-120 User Manual - Page 73
Replacing the Rollers, Separation OFF Lever
![]() |
View all Canon RP10 for CR-120/150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Replacing the Rollers When rollers are worn, paper jams and double feeds tend to occur. You can replace the rollers (Pickup Roller, Feed Roller, and Separation Roller) according to the following procedure. The exchange roller kit is not included with the scanner. Purchase an exchange roller kit separately, as shown below. Compatible exchange roller kit: 1732C001 A Pull the Open Button, and pull the Right Maintenance Cover open to the right. IMPORTANT As shown in the figure, release hook A (left bottom) and hook B (right top toward the back) of the roller cover, and then lift up the cover. This will allow you to remove the cover. C Push up the Separation OFF Lever in the direction of the arrow. . B Remove the Roller Cover. Separation OFF Lever 73
![](/manual_guide/products/canon-rp10-cr120150-imageformula-cr150-cr120-user-manual-c5d640a/73.png)