Canon RP10 for CR-120/150 imageFORMULA CR-150 / CR-120 User Manual - Page 46
Document Feeding and Scanning
![]() |
View all Canon RP10 for CR-120/150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Document Feeding and Scanning This section describes how to load and scan documents. CAUTION • Avoid wearing loose fitting clothing, dangling jewelry, long ties, or long hair that could become entangled with moving parts, especially the rollers that feed paper through the scanner. If such objects become entangled, immediately disconnect the power plug from the power outlet. • Check the paper stack and remove all clips, staples, pins, or any other type of metal or plastic fastener. These objects may cause damage to the document, a paper jam, or a scanner malfunction. • Do not touch anything except the operation buttons when documents are being fed. • Do not touch documents that are being fed under any circumstances. The documents that are being fed may cut your hand. Scan Procedure A Open the Document Feed / Eject Tray. B Carefully align the edges of the document. C Loads the documents with their front sides facing right and without exceeding the load capacity. D Adjust the Eject Stopper in accordance with the document. E Instruct scanning to start from the software application. NOTE • When Using the Accompanying Scanning Utility for CR-120/CR-150: There are three scanning methods as follows. Follow the each instruction. Scan 1 page Click [Scan Page] from the [File] menu. Scan Batch to File A Click [Scan Batch to File] from the [File] menu. B Input the File name, and then click [Save]. C Select Simplex or Duplex, and then click [Start Scanning]. 46
![](/manual_guide/products/canon-rp10-cr120150-imageformula-cr150-cr120-user-manual-c5d640a/46.png)