Canon S330 S330 User's Guide

Canon S330 Manual

Get Canon S330 PDF manuals and user guides View all Canon S330 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon S330 manual content summary:

  • Canon S330 | S330 User's Guide - Page 1
    BUBBLE JET PRINTER User's Guide V1
  • Canon S330 | S330 User's Guide - Page 2
    17 Operation Panel 18 Printer Driver Functions (Windows 19 Opening the Printer Properties Dialog Box 20 Printer Properties Dialog Box Description 22 BJ Status Monitor Functions 37 Cancelling a Print Job 40 Uninstalling Printer Drivers 41 Printer Driver Functions (Macintosh 42 Description
  • Canon S330 | S330 User's Guide - Page 3
    62 Uninstalling Printer Drivers 66 Routine Maintenance 67 When to Replace Ink Tank and Maintain Print Head 68 Replacing an Ink Tank 69 Resetting the Ink Counter 74 How Low Ink Warning Setting Works 77 Printing the Nozzle Check Pattern 82 Print Head Cleaning 86 Print Head Deep Cleaning
  • Canon S330 | S330 User's Guide - Page 4
    Table of Contents Troubleshooting 128 Cannot Install the Printer Driver 129 Print Quality is Poor or Contains Errors 131 Printer Does Not Start or Stops During Print Jobs 149 Paper Does Not Feed Properly or Paper Jams 155 The POWER Lamp Flashes Orange 159 An Error Message is Displayed on the
  • Canon S330 | S330 User's Guide - Page 5
    Canon S330 Bubble Jet Printer. This User's Guide provides complete explanations of the features and functions of the printer. This guide uses the following symbols to indicate important information. Always observe these instructions. Warning ® Instructions Windows Information for Windows users only.
  • Canon S330 | S330 User's Guide - Page 6
    How to Use This Manual How to Use This Manual To view this User's Guide, we recommend that you use Acrobat Reader 4.0 or Acrobat Reader 3.0. Please note that screens displayed by Acrobat Reader 3.0 are slightly different. Use this button to
  • Canon S330 | S330 User's Guide - Page 7
    How to Use This Manual Use this button to search for a word. Displays the table of contents. Click the heading to jump to the topic. Click the " " symbol to see the headings for each chapter. Click the " " symbol to close the headings. 7
  • Canon S330 | S330 User's Guide - Page 8
    read the safety warnings and cautions provided in this manual to ensure that you use the printer safely. Do not attempt to use the printer in any way not described in this manual. Warning ® You may cause an electric shock/fire or damage the printer if you ignore any of these safety precautions
  • Canon S330 | S330 User's Guide - Page 9
    and call for service. Periodically, unplug the printer and use a dry cloth to wipe off any dust or dirt collects on the plug and the power outlet. If the printer is placed at a location exposed to a lot of dust, smoke, or high humidity, the dust that collects on the plug absorbs moisture and may
  • Canon S330 | S330 User's Guide - Page 10
    disassemble or modify the printer. There are no user serviceable parts inside the printer. The printer contains high-voltage components. Never attempt any maintenance procedure not described in this guide. s Working around the printer Do not use inflammable sprays near the printer. This could cause
  • Canon S330 | S330 User's Guide - Page 11
    install the printer in a location with an ambient temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free). Do not place the printer on a thick rug or carpet. Ensure that the area around the power outlet is kept clear at all times
  • Canon S330 | S330 User's Guide - Page 12
    plug by pulling on the cord. Safety Precautions Do not use an extension lead. If you do not intend to use the printer for a long period of time, unplug the printer after turning it off. Never use a power supply voltage other than that supplied in the country of purchase. The correct power supply
  • Canon S330 | S330 User's Guide - Page 13
    ) falls into the printer, unplug the power cord and call for service. s Print heads and ink tanks For safety reasons store print heads and ink tanks out of the reach of small children. If a child ingests any ink, consult a doctor immediately. Do not shake print heads or ink tanks. Ink may leak out
  • Canon S330 | S330 User's Guide - Page 14
    Printer Parts and Their Functions Printer Parts and Their Functions • Front View • Rear View • Inside the Printer • Operation Panel 14
  • Canon S330 | S330 User's Guide - Page 15
    , ensure the left edge just touches this guide. To move the paper guide, pinch the knob and slide in the appropriate direction. Paper Rest Front Cover Open to replace the ink tanks or remove jammed paper. Sheet Feeder Load paper here. Paper feeds automatically, one sheet at a time. Front View 15
  • Canon S330 | S330 User's Guide - Page 16
    Rear View Printer Parts and Their Functions USB Port Connects the printer to a computer through a USB interface. Rear View 16
  • Canon S330 | S330 User's Guide - Page 17
    Paper Thickness Lever Adjusts the gap between the print head and the surface of the printing paper. Print Head Lock Lever Locks the print head into the holder. Once the print head is installed, do not touch this lever. Print Head Holder Install the print head here. Inside the Printer 17
  • Canon S330 | S330 User's Guide - Page 18
    . Green: the printer is ready to print. Flashing green: the printer is preparing to print, or is currently printing. Flashing orange: an error has occurred and the printer is not ready to print. Flashing orange and green alternately: an error has occurred that may require a service call. Operation
  • Canon S330 | S330 User's Guide - Page 19
    Printer Driver Functions (Windows) Printer Driver Functions (Windows) • Opening the Printer Properties Dialog Box • Printer Properties Dialog Box Description • BJ Status Monitor Functions • Cancelling a Print Job • Uninstalling Printer Drivers 19
  • Canon S330 | S330 User's Guide - Page 20
    In your application, select the command to print a document. The Print dialog box can usually be opened by selecting Print from the File menu. Note 2 Ensure that Canon S330 is selected in the Name field. Then click the Properties button. The Printer Properties dialog box opens. ® Depending on your
  • Canon S330 | S330 User's Guide - Page 21
    , click Start and select Control Panel, Printers and Other Hardware, and then Printers and Faxes. 2 Select the Canon S330 icon. 3 Open the File menu and select: • Windows 98/Windows Me Properties • Windows 2000/Windows XP Printing Preferences... The Printer Properties dialog box opens. Opening the
  • Canon S330 | S330 User's Guide - Page 22
    Driver Functions (Windows) Printer Properties Dialog Box Description • Main Tab • Page Setup Tab • Stamp/Background Tab • Effects Tab • Profiles Tab • Maintenance Tab Note ® The screens in this section refer to Windows 98/Windows Me operation. The equivalent screens for Windows 2000 and Windows XP
  • Canon S330 | S330 User's Guide - Page 23
    Main Tab (6) Printer Driver Functions (Windows) (1) (2) (3) (4) (5) (1) Media Type Ensure this setting matches the type of media loaded in the printer. (2) Print Quality Select the print quality you require from among the different options. To select custom Print quality, select Custom and click
  • Canon S330 | S330 User's Guide - Page 24
    then click the desired item. To see a description of operating procedures, click the Help button. If the button does not appear when using Windows 2000 or Windows XP, click the Start button then select Programs (or All Programs) - Canon S330 - Guide. Printer Properties Dialog Box Description 24
  • Canon S330 | S330 User's Guide - Page 25
    Page Setup Tab (1) Page Size Ensure the correct paper size is selected. Printer Driver Functions (Windows) (1) (2) (3) (4) (5) (6) (7) (8) Printer Properties Dialog Box Description 25
  • Canon S330 | S330 User's Guide - Page 26
    Printer Driver Functions (Windows) (2) Orientation Select landscape or portrait printing and ensure it is the same orientation used in the application. (3) Printing Type Select the printing method from among the following. Normal-size Printing The document is printed according to the original
  • Canon S330 | S330 User's Guide - Page 27
    Printer Driver Functions (Windows) (5) Amount of Extension When you select Borderless Printing, the sections that extend beyond the paper are not printed because the image is enlarged to a size slightly larger than the paper size. You can use the slide bar to adjust how much the image
  • Canon S330 | S330 User's Guide - Page 28
    /Background Tab Printer Driver Functions (Windows) (1) (4) (2) (3) (5) (7) (6) (1) Stamp Select the check box and choose the stamp. (2) Place stamp over text When Stamp is selected, you can select this check box. When selected, the stamp is printed over the print data. Printer Properties Dialog
  • Canon S330 | S330 User's Guide - Page 29
    Printer Driver Functions (Windows) (3) Stamp first page only When Stamp is selected, you can select this check box. When selected, the stamp is printed only on the first page. (4) Define Stamp... This allows you to create new stamps, or modify details of a selected stamp. (5) Background Select the
  • Canon S330 | S330 User's Guide - Page 30
    Effects Tab Printer Driver Functions (Windows) (1) (2) (3) (4) (5) (1) Simulate Illustration This function manipulates colour image data with certain effects. Select the check box and adjust the brightness of the image with the Contrast slide bar. Printer Properties Dialog Box Description 30
  • Canon S330 | S330 User's Guide - Page 31
    Printer Driver Functions (Windows) (2) Monochrome Effects Prints a colour image in a single colour. Select the check box and choose a colour or use a custom colour using Select Colour/Select Color. (3) Vivid Photo (5) Photo Optimizer PRO Optimises the colour of images taken from a digital camera or
  • Canon S330 | S330 User's Guide - Page 32
    Profiles Tab Printer Driver Functions (Windows) (2) (1) (3) (4) (6) (5) (1) Printing Profiles This list displays the printing settings currently registered in the Profiles tab. The Current Settings profile contains the settings currently specified in the Main, Page Setup, Stamp/
  • Canon S330 | S330 User's Guide - Page 33
    Printer Driver Functions (Windows) (2) Details Displays all the printer settings selected in Printing Profiles. (3) Description Displays a description of the printer settings selected in Printing Profiles. You can enter the description when saving the printer settings. (4) Add to Profiles... Click to
  • Canon S330 | S330 User's Guide - Page 34
    Tab Printer Driver Functions (Windows) (1) (2) (5) (3) (6) (4) (9) (7) (10) (8) (11) (1) Cleaning Click to start print head cleaning. (2) Deep Cleaning Click to start print head deep cleaning. Use this function only if Cleaning has not improved the print quality. Printer Properties
  • Canon S330 | S330 User's Guide - Page 35
    Printer Driver Functions (Windows) (3) Print Head Alignment Aligns the print head. For details on print head alignment, refer to Quick Start Guide. (4) Nozzle Check Prints the nozzle check pattern to ensure the print head nozzles are outputting ink normally. For details, refer to "Examining the
  • Canon S330 | S330 User's Guide - Page 36
    Printer Driver Functions (Windows) (11) Start Status Monitor Click to start the BJ Status Monitor, to check the printer status and the progress of printing jobs. Printer Properties Dialog Box Description 36
  • Canon S330 | S330 User's Guide - Page 37
    BJ Status Monitor Functions Printer Driver Functions (Windows) The BJ Status Monitor allows you to check the status of the printer. If an error occurs, the status monitor indicates the nature of the error and suggests an appropriate solution. When the low ink warning is set to be enabled, the
  • Canon S330 | S330 User's Guide - Page 38
    Printer Driver Functions (Windows) Note ® To open the BJ Status Monitor when the printer is not printing, click the Maintenance tab in the Printer Properties dialog box and click the Start Status Monitor button. BJ Status Monitor Functions 38
  • Canon S330 | S330 User's Guide - Page 39
    Monitor is automatically displayed when an error occurs, e.g. if the printer runs out of paper or paper jams. In such cases, take the appropriate action as described in the Printer Status tab. In Windows 98, Windows Me, click the Guide tab and follow the instructions on screen. When paper has run
  • Canon S330 | S330 User's Guide - Page 40
    Cancelling a Print Job Printer Driver Functions (Windows) To cancel the current print job, first open the BJ Status Monitor. 1 Click the Canon BJ Status Monitor icon on the Task Bar. 2 Click Cancel Printing. Note ® If Cancel Printing is greyed out, press the printer's RESUME/CANCEL button to
  • Canon S330 | S330 User's Guide - Page 41
    Printer Drivers Printer Driver Functions (Windows) Use the Uninstaller to delete any unwanted printer drivers. This allows you to delete all the files associated with the printer driver at the same time. 1 Click the Start button and select Programs, Canon S330, Uninstall. For Windows XP
  • Canon S330 | S330 User's Guide - Page 42
    Printer Driver Functions (Macintosh) Printer Driver Functions (Macintosh) • Description of Print Settings • BJ Print Monitor • Cancelling a Print Job • Using the Printer with a Network • Uninstalling Printer Drivers 42
  • Canon S330 | S330 User's Guide - Page 43
    Description of Print Settings • Page Setup Dialog Box Printer Driver Functions (Macintosh) • Printer Utility Dialog Box • Print Dialog Box • Options Dialog Box • Register Settings Dialog Box • Detailed Setting Dialog Box Description of Print Settings 43
  • Canon S330 | S330 User's Guide - Page 44
    Page Setup Dialog Box Printer Driver Functions (Macintosh) The Page Setup dialog box contains settings for the printed page, such as the size of the print media, and resizing the printed image. To open the Page Setup dialog box, select Page Setup from the File menu in your application program.
  • Canon S330 | S330 User's Guide - Page 45
    the length and width of the paper. (8) Utilities Click to open the Printer Utility dialog box for maintenance operations such as print head cleaning and nozzle check pattern printing, as well as for changing the print mode. (9) Save Settings Saves the settings specified in the Page Setup dialog
  • Canon S330 | S330 User's Guide - Page 46
    Utility Dialog Box Printer Driver Functions (Macintosh) The Printer Utility dialog box is displayed when you click the Utilities button in the Page Setup dialog box. (1) (2) (1) Select the function you wish to perform: Cleaning, Test Print, Remaining ink level setting, Auto Power, Quiet Mode
  • Canon S330 | S330 User's Guide - Page 47
    Note Printer Driver Functions (Macintosh) ¬ Printing the Nozzle Check Pattern ¬ Print Head Cleaning ¬ Print Head Deep Cleaning ¬ How Low Ink Warning Setting Works ® For information about Print Head Alignment, refer to the Quick Start Guide. Description of Print Settings 47
  • Canon S330 | S330 User's Guide - Page 48
    Dialog Box Printer Driver Functions (Macintosh) The Print dialog box specifies the media type and print settings to be used for your print job. To open the Print dialog box, select Print from the File menu in your application program. (1) (2) (3) (4) (6) (5) (1) Options... Specify the output
  • Canon S330 | S330 User's Guide - Page 49
    Printer Driver Functions (Macintosh) (4) Details... Allows you to manually set the print quality and colour settings in the Detailed Setting Dialog Box. (5) Print Mode Select the option in accordance with the document type and printing purpose. (6) Greyscale Printing/Grayscale Printing Select to
  • Canon S330 | S330 User's Guide - Page 50
    Detailed Setting Dialog Box Printer Driver Functions (Macintosh) To open the Detailed Setting dialog box, select Manual from Print Mode, then click Details. (2) (1) (3) s Quality panel (1) Panel display icons Click these icons to switch between panels in the Detailed Setting dialog box.
  • Canon S330 | S330 User's Guide - Page 51
    Printer Driver Functions (Macintosh) (2) Print Quality Move the slide bar to adjust the balance between print quality and speed. Moving the bar to the right enhances print quality, and moving it to the left increases printing speed. (3) Halftoning Select either Dither or Diffusion ink dot confi
  • Canon S330 | S330 User's Guide - Page 52
    Printer Driver Functions (Macintosh) s Special Effects Panel To display the Special Effects panel, click the Special effects display icon. (1) (2) (3) (4) (1) Simulate . Select the check box and adjust the brightness of the image with the Contrast slide bar. Description of Print Settings 52
  • Canon S330 | S330 User's Guide - Page 53
    Printer Driver Functions (Macintosh) (2) Monochrome effects Prints a colour image in a single colour. Select the check box and choose a colour or use a custom colour using Select Colour/Select Color. (3) Vivid Photo (4) Photo Optimizer PRO Optimises the colour of images taken from a digital camera or
  • Canon S330 | S330 User's Guide - Page 54
    Printer Driver Functions (Macintosh) s Colour/Color Panel To display the Colour/Color panel, click the Colour/Color : BJ Standard, ColorSync or None. BJ Standard is usually the optimum colour correction method for printing with a BJ printer. When ColorSync is selected, you should also specify the
  • Canon S330 | S330 User's Guide - Page 55
    Printer Driver Functions (Macintosh) (2) Print Type For printing that emphasises intermediate colours, select Photo. For printing that emphasises the brightness of primary colours, select Graphics. For documents that contain large amounts of a basic colour, select Spot Colour/Spot Color. (3) Printer
  • Canon S330 | S330 User's Guide - Page 56
    Options Dialog Box Printer Driver Functions (Macintosh) To open the Options dialog box, click the Options... button in the Print dialog box. (1) (2) (3) (4) (5) (6) (1) Layout Use this function to print more than one page on a single sheet of paper. Typically, this setting is set to display
  • Canon S330 | S330 User's Guide - Page 57
    Printer Driver Functions (Macintosh) 2 Page/Sheet Printing/4 Page/Sheet Printing Pages are reduced and printed so that two or four pages fit on each printed page. You can also select page order and whether to place a border around each page. Poster (Divided into 4) / (Divided into 9) / (Divided into
  • Canon S330 | S330 User's Guide - Page 58
    Settings Dialog Box Printer Driver Functions (Macintosh) To open the Register Settings dialog box, click the Apply... button in the Print dialog box. (1) (2) (4) (5) (3) (1) Settings Displays a list of the registered print settings. (2) Defaults Restores the print settings selected in
  • Canon S330 | S330 User's Guide - Page 59
    BJ Print Monitor Printer Driver Functions (Macintosh) The BJ Print Monitor allows you to check the progress of print jobs. You can launch the BJ Print Monitor if background printing is enabled in the Chooser utility. s Opening the BJ Print Monitor 1 Select Chooser from the Apple Menu. 2 Set
  • Canon S330 | S330 User's Guide - Page 60
    Driver Functions (Macintosh) ... Click to pause printing of the specified document. ... Click to resume printing. ... Click to cancel printing of the specified document. Displays the printer status. If an error occurs, instructions on what to do are displayed. Displays the printer status and ink
  • Canon S330 | S330 User's Guide - Page 61
    Cancelling a Print Job Printer Driver Functions (Macintosh) When the BJ Print Monitor is running, you can use it to cancel or suspend the current print job. 1 Select BJ Print Monitor in the Application Menu. Note 2 Click the name of the print job you wish to cancel, then click . The document
  • Canon S330 | S330 User's Guide - Page 62
    the network. s Before Setting up the Printer Install the printer driver on each network computer that will use the printer. For information on installation, refer to the Quick Start Guide. s Printer Setup To use the printer on a network, first set up the print server, then set up each client machine
  • Canon S330 | S330 User's Guide - Page 63
    4 Click Share. Printer Driver Functions (Macintosh) 5 Confirm that S330 server is selected in Enter new print server name: then click Send. 6 Confirm that the new print server name has been added to Current print servers then click Close. 7 Click the close box to close the Chooser. • Client setup
  • Canon S330 | S330 User's Guide - Page 64
    Printer Driver Functions (Macintosh) s Checking Print Status • Checking print status from the print server To check the status of a print job from the print server, start the BJ Print Monitor. Select BJ Print Monitor in the Application Menu. To close the BJ Print Monitor, select Close Status Window
  • Canon S330 | S330 User's Guide - Page 65
    s BJ Status Monitor Functions Printer Driver Functions (Macintosh) .... Click to pause printing of the specified document. .... Click to resume printing. .... Click to cancel printing of the specified document. Note ® • You can determine the owner of a computer by selecting the File Sharing
  • Canon S330 | S330 User's Guide - Page 66
    with it at the same time. Before proceeding, ensure you save any unsaved files in any currently running applications. Note 1 Load the Setup Software & User's Guide CD-ROM. 2 Double-click the Printer Driver folder. 3 Double-click the Installer icon. 4 When the Software License Agreement is displayed
  • Canon S330 | S330 User's Guide - Page 67
    Routine Maintenance • When to Replace Ink Tank and Maintain Print Head • Replacing an Ink Tank • Resetting the Ink Counter • How Low Ink Warning Setting Works • Printing the Nozzle Check Pattern • Print Head Cleaning • Print Head Deep Cleaning • Transporting the Printer Routine Maintenance 67
  • Canon S330 | S330 User's Guide - Page 68
    ¬ Print Head Cleaning If the problem remains ¬ Print Head Deep Cleaning Still the problem remains ¬ Replacing an Ink Tank If ink tank replacement does not resolve the problem, the print head may be worn out. Contact a Canon service representative. When to Replace Ink Tank and Maintain Print Head
  • Canon S330 | S330 User's Guide - Page 69
    BCI-24 Black • Colour: BCI-24 Color Note ® Damage caused by using a refilled cartridge is not covered by the Canon warranty. Canon recommends using only original Canon ink tanks to ensure the best quality. 1 Ensure that the printer is on, and then open the front cover. The print head holder moves
  • Canon S330 | S330 User's Guide - Page 70
    towards you to release. Routine Maintenance colour black Then lift it from its slot. Do not touch the lock lever; remove only the ink tank. Important ® • Handle ink tanks carefully to avoid staining clothing or the surrounding area. • Discard empty ink tanks according to the local laws and
  • Canon S330 | S330 User's Guide - Page 71
    Routine Maintenance 3 Unpack a new ink tank and remove the orange protective cap. Important ® • Do not re-attach the protective cap once you have removed it. • Once you have removed the protective cap, do not touch the open ink port. Replacing an Ink Tank 71
  • Canon S330 | S330 User's Guide - Page 72
    4 Insert the ink tank into a slot. Routine Maintenance Replacing an Ink Tank 72
  • Canon S330 | S330 User's Guide - Page 73
    6 Close the front cover. The print head holder moves to the right. The ink tank installation process is now complete. ® • To maintain optimal print quality, use an ink tank within six months of first use. • Once an ink tank has been used, do not remove it from the printer and leave it out in the
  • Canon S330 | S330 User's Guide - Page 74
    firmation message of ink tank replacement is displayed before the next print job. Windows 1 Check the message, and click Yes. Note 2 Select the replaced ink tank, and click OK. ® When both black and colour ink tanks have been replaced, select both Black and Colour. Resetting the Ink Counter 74
  • Canon S330 | S330 User's Guide - Page 75
    ® When both black and colour ink tanks have been replaced, select both Black and Colour. s Resetting the ink counter from the printer driver setting screen Note ® Do not reset an ink counter of an ink tank already in use. Windows 1 Ensure the printer is on and open the Printer Properties dialog box
  • Canon S330 | S330 User's Guide - Page 76
    can normally be opened by selecting Page Setup... in the File menu. 2 Click Utilities icon to open the Printer Utility dialog box. 3 Select Remaining ink level setting from the pull-down menu and click Ink Counter Reset. 4 Select the ink tank you have just installed and click Execute. Resetting the
  • Canon S330 | S330 User's Guide - Page 77
    printing. The Low Ink Warning has been preset to be automatically displayed. Note ® Refer to "Modifying the low ink warning setting" to change the setting if you do not want to display the Low Ink Warning. s What is Low Ink Warning? Reset the ink counter of the ink tank installed. When ink
  • Canon S330 | S330 User's Guide - Page 78
    s Low Ink Warning Display The '!' shows a low ink level in the ink tank. Routine Maintenance The colour ink becomes low. BJ Status Monitor (Windows) BJ Status Dialog (Macintosh) The colour ink becomes low. How Low Ink Warning Setting Works 78
  • Canon S330 | S330 User's Guide - Page 79
    Macintosh Note ® When the background printing is enabled, the low ink warning is displayed on the BJ Print Monitor (Macintosh). ¬ BJ Print Monitor s How to Display Low Ink Warning Correctly • Reset the ink counter every time you install a new ink tank The ink counter cannot work correctly unless
  • Canon S330 | S330 User's Guide - Page 80
    Modifying the low ink warning setting Routine Maintenance Windows 1 Ensure the printer is on and open the Printer Properties dialog box. ¬ Opening the Printer Properties Dialog Box 2 On the Maintenance tab, click Low Ink Warning Setting icon. 3 Macintosh Modify the Display low ink warning and
  • Canon S330 | S330 User's Guide - Page 81
    Routine Maintenance 4 Modify the Display low ink warning and Display a confirmation message of ink tank replacement settings, and click Send. How Low Ink Warning Setting Works 81
  • Canon S330 | S330 User's Guide - Page 82
    the ink ejects normally from the print head nozzles, and to verify print head alignment. Use this function when printed results are blurred or the colour is incorrect. Nozzle check pattern printing can be executed from the Windows and Macintosh printer drivers, or from the printer itself. s Printing
  • Canon S330 | S330 User's Guide - Page 83
    Page Setup dialog box can normally be opened by selecting Page Setup... in the File menu. 3 Click the Utilities button to open the Printer Utilities dialog box. 4 Select Test Print from the pull-down menu, and then click the Nozzle Check icon. 5 When the confirmation message is displayed, click OK
  • Canon S330 | S330 User's Guide - Page 84
    s Printing the Nozzle Check Pattern through the Printer Routine Maintenance 1 With the printer on, load a sheet of A4 or Letter paper in the printer. 2 Hold the RESUME/CANCEL button down until the POWER lamp flashes twice. ¬ Examining the Nozzle Check Pattern Printing the Nozzle Check Pattern 84
  • Canon S330 | S330 User's Guide - Page 85
    pattern should appear as follows when ink is discharged properly. Examine the nozzle check pattern output by the printer. Lines missing here indicate the print head requires cleaning. Unevenness in these patterns indicates the print head requires alignment. Printing the Nozzle Check Pattern 85
  • Canon S330 | S330 User's Guide - Page 86
    might be clogged. Head cleaning can be performed either from the printer drivers or from the printer itself. Note ® Cleaning the head consumes ink, so perform head cleaning only when necessary. s Cleaning the Print Head from the Printer Drivers Windows 1 Ensure that the printer is on. 2 Open
  • Canon S330 | S330 User's Guide - Page 87
    printer is on. 2 Open the Page Setup dialog box. The Page Setup dialog box can normally be opened by selecting Page Setup... in the File menu. 3 Click the Utilities button to open the Printer Utility dialog box. 4 Select Cleaning from the pull-down menu, and then click the Cleaning icon. Print Head
  • Canon S330 | S330 User's Guide - Page 88
    colours/All colors: All nozzles Black: Black ink nozzles Colour/Color: Colour ink nozzles s Cleaning the Print Head from the Printer This operation cleans all nozzles, both black and colour. Because this method also resets the printer, any print data stored in the printer is lost. 1 Ensure the
  • Canon S330 | S330 User's Guide - Page 89
    not improve by standard print head cleaning, try deep cleaning, which is a more powerful process. Perform print head deep cleaning from the printer driver. Note ® Print head deep cleaning consumes ink, so perform this procedure only when necessary. Windows 1 Ensure the printer is on. 2 Open the
  • Canon S330 | S330 User's Guide - Page 90
    not, perform print head deep cleaning once more. If the head is still not clean after the second deep cleaning, the print head may be worn out, even if ink remains in the ink tanks. In this event, contact a Canon service representative. ¬ Printing the Nozzle Check Pattern Print Head Deep Cleaning
  • Canon S330 | S330 User's Guide - Page 91
    , pack the printer carefully and thoroughly in protective material inside of a sturdy box. 1 Turn the printer off. 2 After making sure that the POWER lamp is off, unplug the printer. Important ® Do not unplug the printer while the POWER lamp is lit or flashing to protect the printer from damage
  • Canon S330 | S330 User's Guide - Page 92
    3 Remove the paper rest and the paper output tray. Routine Maintenance 4 Disconnect the printer cable from the computer and from the printer, and then disconnect the power cord from the printer. Transporting the Printer 92
  • Canon S330 | S330 User's Guide - Page 93
    Routine Maintenance 5 Secure the printer with adhesive tape as shown, and then pack it in a plastic bag. Transporting the Printer 93
  • Canon S330 | S330 User's Guide - Page 94
    Routine Maintenance 6 Attach protective material to both sides of the printer when packing the printer. Clearly label the box as "Fragile", if using a transport company. Transporting the Printer 94
  • Canon S330 | S330 User's Guide - Page 95
    HR-101N • Glossy Photo Paper GP-301N/GP-301 • High Gloss Photo Film HG-201 • Glossy Photo Cards FM-101 • Photo Paper Pro PR-101 • Photo Paper Pro PC-101S • Photo Paper Plus Glossy PP-101 • Matte Photo Paper MP-101 • Transparencies CF-102 • T-Shirt Transfers TR-201 • Banner Paper Printing Media 95
  • Canon S330 | S330 User's Guide - Page 96
    Printing paper will not only produce unsatisfactory results, but can also cause the printer to jam or malfunction. • Folded, curled or wrinkled paper • Wet g/m2 / 28 lb) • Picture postcards • Postcards with an affixed photo or sticker • Envelopes with a double flap • Sealed envelopes • Envelopes
  • Canon S330 | S330 User's Guide - Page 97
    (17 to 28 lb) Do not use paper heavier than this (except for supported Canon-brand media), as it could jam in the printer. s Types The following types of media can be used. For more information about the media and the printing methods, refer to the specific sections. Plain paper: Refer to the Quick
  • Canon S330 | S330 User's Guide - Page 98
    ¬ T-Shirt Transfers TR-201 ¬ Banner Paper Printing Media Compatible Media Types 98
  • Canon S330 | S330 User's Guide - Page 99
    Media Use either European DL or US Com. #10 size envelopes. s Preparation for Printing 1 Press down on all four corners and edges of the envelopes to flatten them as shown below. 2 If the envelopes are curled, hold the opposite
  • Canon S330 | S330 User's Guide - Page 100
    Printing Media 3 If the leading edge of an envelope is puffed up or curled, . * The above illustrations show a side view of the leading edge of the envelope. The envelopes may jam in the printer if they are not completely flat and the edges are not aligned. Ensure that no curl or puff exceeds 3 mm
  • Canon S330 | S330 User's Guide - Page 101
    Printing Media s Loading • Place envelopes lengthwise with the flap to the left and the curl, clean the paper feed roller. 1 Ensure the printer is on and there is not any paper loaded in the printer. 2 Hold the RESUME/CANCEL button down and release as the POWER lamp flashes three times. Envelopes 101
  • Canon S330 | S330 User's Guide - Page 102
    button down and release as the POWER lamp flashes three times to feed the sheet. Repeat this three times. If the printer still does not feed the envelopes through even after the cleaning, repeat Step 4 again. s Printer Driver Settings • Media Type: • Page Size: • Orientation: Envelope Select
  • Canon S330 | S330 User's Guide - Page 103
    Media This type of paper provides better colour reproduction than plain paper. It is suitable for printing business documents that feature graphics, and for photographs. s Loading • Load the paper with the whiter side facing up. • Set the paper thickness lever to the
  • Canon S330 | S330 User's Guide - Page 104
    Printer Driver Settings • Media Type: High Resolution Paper • Page Size: Ensure the setting matches the size set in the application. Printing Media s Handling of Printed the ink takes a long time to dry, remove each sheet as soon as it is printed. s Printable Area ¬ Printing Area High Resolution Paper HR
  • Canon S330 | S330 User's Guide - Page 105
    with the whiter side facing up. • Set the paper thickness lever to the left. • A maximum of 10 sheets can be loaded at once. • When printing on Glossy Photo Paper GP-301, do not use any loading support sheet. Paper thickness lever Print side (Whiter side) Glossy Photo Paper GP-301N/GP-301 105
  • Canon S330 | S330 User's Guide - Page 106
    s Printer Driver Settings • Media Type: Glossy Photo Paper • Page Size: Ensure the setting matches the size set in the application. Printing Media s Handling of Printed Output • Do not stack more than 10 sheets in the paper output tray. • Do not touch the printed surface until the ink is fixed (
  • Canon S330 | S330 User's Guide - Page 107
    High Gloss Photo Film HG-201 Printing Media This film has an extremely glossy surface, ideal for printing photographs with outstanding results. s Loading • Load only one sheet at a time. • Load the film with the cut corner at the upper right. • If the film is curled, flatten it by curling in the
  • Canon S330 | S330 User's Guide - Page 108
    s Printer Driver Settings • Media Type: High Gloss Photo Film • Page Size: Ensure the setting matches the size set in the application. Printing Media s Handling of Printed Output • Remove each sheet as soon as it is printed. • Do not touch the printed surface until the ink is fixed. s Printable
  • Canon S330 | S330 User's Guide - Page 109
    of the same material as Glossy Photo Paper GP-301, this photo-size paper is intended for printing images that cover the entire surface of the card, without a white border. When printing, use the original application software, Easy-PhotoPrint (for Windows) or ImageBrowser (for Macintosh). s Loading
  • Canon S330 | S330 User's Guide - Page 110
    Printing Media s Handling of Printed Output • Do not stack more than 20 sheets in the paper output tray. • Do not touch the printed surface until the ink is fixed (approx. two minutes). Glossy Photo Cards FM-101 110
  • Canon S330 | S330 User's Guide - Page 111
    x 6 sizes. s Loading • Load only one sheet of A4/Letter at a time. Up to 20 sheets of 4 x 6 size paper can be loaded at once. • Load the paper with the glossier side facing up. • Set the paper thickness lever to the left. Paper thickness lever Print side (Glossier side) Photo Paper Pro PR-101 111
  • Canon S330 | S330 User's Guide - Page 112
    Printer Driver Settings • MediaType: Photo Paper Pro • Page Size: Ensure the setting matches the size set in the application. Printing Media s Handling of Printed Output • Remove each sheet as soon as it is printed tray. • Do not touch the printed surface until the ink is fixed (approx. 30 minutes).
  • Canon S330 | S330 User's Guide - Page 113
    to turn yellow. s Printable Area ¬ Printing Area Note ® For photograph and illustration data that you want to print with Borderless Printing, create the data by using the same 0 mm. For instructions on setting margins, refer to the user's manual for your application. Photo Paper Pro PR-101 113
  • Canon S330 | S330 User's Guide - Page 114
    Made of the same material as Photo Paper Pro PR-101, this photo-size paper is intended for printing images that cover the entire surface of the card, without a white border. When printing, use the original application software, Easy-PhotoPrint (for Windows) or ImageBrowser (for Macintosh). s Loading
  • Canon S330 | S330 User's Guide - Page 115
    s Handling of Printed Output Follow the instructions described in "Photo Paper Pro PR-101". Printing Media Photo Paper Pro PC-101S 115
  • Canon S330 | S330 User's Guide - Page 116
    can be loaded at once. • Load the paper with the glossier side facing up. • Set the paper thickness lever to the left. Paper thickness lever Print side (Glossier side) Photo Paper Plus Glossy PP-101 116
  • Canon S330 | S330 User's Guide - Page 117
    s Printer Driver Settings • MediaType: Photo Paper Plus Glossy • Page Size: Ensure the setting matches the size set in the application. Printing Media s Handling of Printed Output • Remove each sheet as soon as it is printed. • Colours may slightly change if papers are stacked up before the ink is
  • Canon S330 | S330 User's Guide - Page 118
    ® For photograph and illustration data that you want to print with Borderless Printing, create the data by using the same size as the , right, top and bottom margins to 0 mm. For instructions on setting margins, refer to the user's manual for your application. Photo Paper Plus Glossy PP-101 118
  • Canon S330 | S330 User's Guide - Page 119
    Media This is a thick matt water-resistant paper and provides superior colour reproduction. It is suitable for a variety of printing purposes such as paper crafts, calendars and matt photos. This media is available in A4/Letter sizes. s Loading • A maximum of 10 sheets can be loaded at once. • Load
  • Canon S330 | S330 User's Guide - Page 120
    s Printer Driver Settings • MediaType: Matte Photo Paper • Page Size: Ensure the setting matches the size set in the application. Printing Media s Handling of Printed Output • Remove each sheet as soon as it is printed. s Printable Area ¬ Printing Area Note ® For photograph and illustration
  • Canon S330 | S330 User's Guide - Page 121
    Media This film is ideal for printing presentation material for use with overhead projectors. s Loading • Place one sheet of plain A4 or Letter paper under the transparencies in the sheet feeder. • Set
  • Canon S330 | S330 User's Guide - Page 122
    by the edge. Print side s Printer Driver Settings • Media Type: Transparency • Page Size: Ensure the setting matches the size set in the application. s Handling of Printed Output • Remove each transparency as soon as it is printed. • Do not touch the printed surface until the ink is fixed (approx
  • Canon S330 | S330 User's Guide - Page 123
    paper is used to produce iron-on transfers. The image is printed backwards when Media Type is set to T-Shirt Transfer in the printer driver. Note ® For the customers in the United States, refer to the Quick Start Guide for instructions on using TR-101 T-shirt transfers. s Loading • Load only one
  • Canon S330 | S330 User's Guide - Page 124
    s Printer Driver Settings • Media Type: T-Shirt Transfer • Page Size: Ensure the setting matches the size set in the application. Printing Media s Handling of Printed Output • Remove each T-shirt transfer as soon as it is printed. • The T-shirt transfer should be used as soon as possible. Refer to
  • Canon S330 | S330 User's Guide - Page 125
    • When tearing the banner paper, tear off one more sheet than you actually need to print. • The maximum length for one print job is six sheets, so if you will be printing on six sheets, tear off a seven-sheet length. s Loading 1 Set the Paper Thickness Lever to the right. 2 Load the banner paper
  • Canon S330 | S330 User's Guide - Page 126
    Printing Media 3 Place the printer where the printed banner output can hang over the edge of the table. Ensure the ink does not stain the table or floor. Banner Paper 126
  • Canon S330 | S330 User's Guide - Page 127
    Printing Media s Printer Driver Settings • Media Type: • Page Size: • Printing Type: • Copies: Plain Paper When using A4 banner paper: A4 When using letter size banner paper: Letter Banner Printing On a Macintosh, before creating the document, select Banner Printing in the Page Setup dialog box.
  • Canon S330 | S330 User's Guide - Page 128
    Troubleshooting • Cannot Install the Printer Driver • Print Quality is Poor or Contains Errors • Printer Does Not Start or Stops During Print Jobs • Paper Does Not Feed Properly or Paper Jams • The POWER Lamp Flashes Orange • An Error Message is Displayed on the Screen • Have you replaced an ink
  • Canon S330 | S330 User's Guide - Page 129
    Install the Printer Driver Troubleshooting s Follow the installation procedure correctly. Install the printer driver carefully following the procedures described in the Quick Start Guide. If the printer driver was not installed correctly, reinstall it. If you are using Windows, delete the printer
  • Canon S330 | S330 User's Guide - Page 130
    are no problems with the Setup Software & User's Guide CDROM. In Windows, use Explorer to ensure that the CD-ROM can be read. In a Macintosh, check that the CD-ROM icon is visible. If there is a problem with the CD-ROM, contact a Canon service representative. Cannot Install the Printer Driver 130
  • Canon S330 | S330 User's Guide - Page 131
    or Symbols are Printed • Printing is Blurred/Colours are Wrong • Straight Lines are Misaligned • Printed Paper Curls or Ink Blots • Back of Paper is Smudged • Printed Surface is Scratched • White Streaks • Colours are Uneven or Streaked Troubleshooting Print Quality is Poor or Contains Errors 131
  • Canon S330 | S330 User's Guide - Page 132
    the Page Size setting in the Printer Properties dialog box for Windows or the Page Setup dialog box for Macintosh. s Check the amount of the free space on the hard disk. You may need to increase the amount of free space by deleting any unnecessary files. Print Quality is Poor or Contains Errors 132
  • Canon S330 | S330 User's Guide - Page 133
    in the printer. If you are printing a photograph or an illustration from a Windows environment, also increase Print Quality on the Main tab. If you are working in a Macintosh environment, select Photo or Graphic for the Print Mode in the Print dialog box. s Confirm the specified ink tank is installed
  • Canon S330 | S330 User's Guide - Page 134
    Troubleshooting Meaningless Characters or Symbols are Printed s If the problem only occurs when printing a specific document, try editing the document and then printing it. If this does not resolve the problem, there may be a problem with your application program. Print Quality is Poor or Contains
  • Canon S330 | S330 User's Guide - Page 135
    , clean the print head. ¬ Printing the Nozzle Check Pattern ¬ Print Head Cleaning If the problem is not resolved after cleaning the print head several times, replace either of ink tanks. If print quality still remains poor, the print head may be worn out. Contact a Canon service representative. Note
  • Canon S330 | S330 User's Guide - Page 136
    Lines are Misaligned s Align the print head. Windows 1 Open the Printer Properties dialog box. ¬ Opening the Printer Properties Dialog Box 2 Click the Maintenance tab. 3 Click Print Head Alignment. Follow the instructions on the screen. Troubleshooting Print Quality is Poor or Contains Errors 136
  • Canon S330 | S330 User's Guide - Page 137
    Test Print from the pull-down menu, and then click Print Head Alignment. Follow the instructions on the screen. ® Straight lines can become misaligned if the paper thickness lever has been moved. Aligning the print head may also resolve this problem. Print Quality is Poor or Contains Errors 137
  • Canon S330 | S330 User's Guide - Page 138
    In the printer driver settings, select a higher print quality setting. Windows 1 Open the Printer Properties dialog box. ¬ Opening the Printer Properties Dialog Box 2 On the Main tab, click High for the Print Quality setting. Troubleshooting Macintosh 1 Open the Print dialog box. The Print dialog
  • Canon S330 | S330 User's Guide - Page 139
    Curls or Ink Blots Troubleshooting s Use high resolution paper or photo paper to print images that require a lot of ink, (i.e. pictures with intense colours or photographs). s Reduce the Intensity setting in the printer driver and try printing again. Windows 1 Open the Printer Properties dialog
  • Canon S330 | S330 User's Guide - Page 140
    Troubleshooting Macintosh 1 Open the Print dialog box. The Print dialog box can normally be opened by selecting Print in the File menu. 2 For Print Mode, select Manual and then click Details. 3 Click the Colour/Color icon and then drag the Intensity slide bar to set the intensity. Print Quality is
  • Canon S330 | S330 User's Guide - Page 141
    Troubleshooting s If the next page prints before the ink is dry, enable the Pause Page printer driver setting. You can either remove each printed sheet from the output tray as soon as it is printed, or adjust the Ink Drying Wait Time to pause after each sheet has printed. Windows 1 Open the Printer
  • Canon S330 | S330 User's Guide - Page 142
    the procedure below. 1 Load sheets of A4 or Letter plain paper in the printer. 2 Hold down the RESUME/CANCEL button until the POWER lamp flaches three times, and release the button. 3 Repeat this operation until there are no more smudges on the test page. Print Quality is Poor or Contains Errors 142
  • Canon S330 | S330 User's Guide - Page 143
    Surface is Scratched Troubleshooting s Ensure you are using suitable paper. • The paper weight must be less than 105 g/m2 (28 lb). If you use non-Canon brand paper heavier than 105 g/m2 (28 lb), the print head may scratch the printed surface. Clean the print head first and print with the correct
  • Canon S330 | S330 User's Guide - Page 144
    Troubleshooting s Reduce the Intensity setting in the printer driver and try printing again. When printing an image with high intensity, especially on plain paper, the paper may absorb too much ink and become wavy. This may cause the printed surface to become scratched. Windows 1 Open the Printer
  • Canon S330 | S330 User's Guide - Page 145
    Troubleshooting Macintosh 1 Open the Print dialog box. The Print dialog box can normally be opened by selecting Print in the File menu. 2 For Print Mode, select Manual and then click Details. 3 Click the Colour/Color icon and drag the Intensity slide bar to set the intensity. s Ensure you are
  • Canon S330 | S330 User's Guide - Page 146
    Troubleshooting s Print the nozzle check pattern to check the ink output. If a specific colour does not print in the nozzle check pattern, clean the print head. ¬ Printing the Nozzle Check Pattern ¬ Print Head Cleaning The problem can also be resolved by aligning the print head. For details on print
  • Canon S330 | S330 User's Guide - Page 147
    Uneven or Streaked Troubleshooting s Increase the print quality setting in the printer driver settings. Windows 1 Open the Printer Properties dialog box. ¬ Opening the Printer Properties Dialog Box 2 On the Main tab, click High for the Print Quality setting. Macintosh 1 Open the Print dialog box
  • Canon S330 | S330 User's Guide - Page 148
    s Set the halftoning method to Diffusion in the printer driver settings. Troubleshooting Windows 1 Open the Printer Properties dialog box. ¬ Opening the Printer Properties Dialog Box 2 On the Main tab, select Custom for the Print Quality setting, and click Set. 3 Click Diffusion for the Halftoning
  • Canon S330 | S330 User's Guide - Page 149
    Troubleshooting Printer Does Not Start or Stops During Print Jobs • Printing Does Not Start • Printing Stops Before It is Completed • Printer Moves But Does Not Print • Print Head Holder Does Not Move Printer Does Not Start or Stops During Print Jobs 149
  • Canon S330 | S330 User's Guide - Page 150
    until the POWER lamp stops flashing. Note ® When printing a large amount of data such as a photo or graphics, it takes longer than usual to begin printing. While the POWER lamp is flashing, the computer processes the data and sends it to the printer. Simply wait until the processing is completed
  • Canon S330 | S330 User's Guide - Page 151
    Troubleshooting s Ensure the correct printer driver is selected. In Windows, ensure that Canon S330 is selected in the Print dialog box. In Macintosh, ensure that S330 is selected in the Chooser. Note ® In Windows, you can set the Canon S330 as the default printer. s Ensure the printer port is set
  • Canon S330 | S330 User's Guide - Page 152
    amount of data such as a photo or graphics takes time for the computer to process the data, during which the printer may appear to not be functioning. In addition, when continuously printing material that uses a large amount of black ink on plain paper, the printer will sometimes pause. In either
  • Canon S330 | S330 User's Guide - Page 153
    the print head. ¬ Printing the Nozzle Check Pattern ¬ Print Head Cleaning If the problem is not resolved by cleaning the print head several times, replace either of ink tanks. If print quality still remains poor, the print head may be worn out. Contact a Canon service facility. Printer Does Not
  • Canon S330 | S330 User's Guide - Page 154
    Print Head Holder Does Not Move Troubleshooting s Ensure the printer is turned on. The print head holder will not move unless the power is on. If the POWER lamp is off, close the front cover and turn the power on. If the POWER lamp is flashing green, the printer is initialising. When the POWER lamp
  • Canon S330 | S330 User's Guide - Page 155
    Paper Does Not Feed Properly or Paper Jams • Paper Does Not Feed Properly • Envelopes or Post Cards Do Not Feed Properly • Paper Jams Troubleshooting Paper Does Not Feed Properly or Paper Jams 155
  • Canon S330 | S330 User's Guide - Page 156
    Paper Does Not Feed Properly Troubleshooting s Confirm the paper conditions. • If non-Canon brand media, the paper is guide. s When printing envelopes, refer to "Envelopes" in "Printing Media," and prepare the envelopes before printing. Once you have prepared the envelopes, load them in the printer
  • Canon S330 | S330 User's Guide - Page 157
    Properly Troubleshooting If envelopes or post cards do not feed properly even after removing curl, clean the paper feed roller. 1 Ensure the printer is on and there is not any paper loaded in the printer. 2 Hold the RESUME/CANCEL button down and release as the POWER lamp flashes three times. The
  • Canon S330 | S330 User's Guide - Page 158
    Paper Jams Troubleshooting Remove the paper according to the following procedure. 1 Slowly pull the paper out, either from the sheet feeder or from the paper output slot, whichever is easier. If the paper tears and a piece remains inside the printer, open the front cover and remove it. If you
  • Canon S330 | S330 User's Guide - Page 159
    The POWER Lamp Flashes Orange Troubleshooting An error has occurred in the printer. The number of flashes indicates the type of error, as outlined below. Check the cause and take the appropriate action. s Two flashes: Out of paper, paper jam or paper feed error Replace the paper correctly and press
  • Canon S330 | S330 User's Guide - Page 160
    s Six flashes: No print head installed Install a print head. Troubleshooting s Seven flashes: Defective print head Contact a Canon service representative. s Eight flashes: Waste ink tank almost full The printer has a built-in waste ink tank for the ink used during print head cleaning. Eight flashes
  • Canon S330 | S330 User's Guide - Page 161
    Troubleshooting s POWER lamp flashes alternate green and orange: An error that requires contacting a Canon service representative may have occurred. Turn the printer off and unplug the printer from the power supply. Plug the printer back in and turn the printer back on. If the problem remains,
  • Canon S330 | S330 User's Guide - Page 162
    An Error Message is Displayed on the Screen • Error Writing to USBxxx Windows • Application Error or General Protection Fault • Other Error Messages Windows • Other Error Messages Macintosh Windows Troubleshooting An Error Message is Displayed on the Screen 162
  • Canon S330 | S330 User's Guide - Page 163
    Error Writing to USBxxx Troubleshooting Windows s Ensure the printer is turned on. If the POWER lamp is off, turn the printer on. If the POWER lamp is flashing green, the printer is initialising. Wait until the POWER lamp stops flashing. s Ensure the printer is securely connected to the computer.
  • Canon S330 | S330 User's Guide - Page 164
    of a problem with the device. In Windows 2000 or Windows XP, open the USB Printing Support Properties dialog box to see the General tab. If an error has occurred, follow the instruction of "Notes on Handling the USB Interface (for Windows Users)" in the Quick Start Guide. An Error Message is
  • Canon S330 | S330 User's Guide - Page 165
    Canon S330) or USBnnn (Canon S330) ("n" represents a number) in the Print to the following port. s There may be a problem in the printer driver. Uninstall the printer driver and reinstall it. ¬ Uninstalling Printer Drivers Also refer to the procedure "Notes on Handling the USB Interface (for Windows
  • Canon S330 | S330 User's Guide - Page 166
    or General Protection Fault Troubleshooting Windows s Ensure the application program you are using is intended for your operating system. For example, if you attempt to print with a Windows 3.1 application under Windows 98, the application may not function correctly and an error may occur. Use an
  • Canon S330 | S330 User's Guide - Page 167
    your application. s There may be a problem in the printer driver. Uninstall the printer driver and reinstall it. Also refer to the procedure "Notes on Handling the USB Interface (for Windows Users)" in the Quick Start Guide. ¬ Uninstalling Printer Drivers An Error Message is Displayed on the Screen
  • Canon S330 | S330 User's Guide - Page 168
    Error Messages Troubleshooting Windows s If the BJ Status Monitor is displayed, follow the instructions on screen. If an error occurs during printing, the BJ Status Monitor displays the error on the Printer Status tab. Follow the instructions on screen. In Windows 98 or Windows Me, click the Guide
  • Canon S330 | S330 User's Guide - Page 169
    Uninstall the printer driver and reinstall it. ¬ Uninstalling Printer Drivers Background printing failed (Windows 98/Windows Me only) Restart Windows and try printing again. Could not print Application name - File name Try printing again once the current job is finished. An Error Message is Displayed
  • Canon S330 | S330 User's Guide - Page 170
    the printer driver and reinstall it. ¬ Uninstalling Printer Drivers Error No.: X300 Ensure the power is on, and that the printer and the computer are securely connected. If the problem remains, verify the Chooser setting. 1 In the Apple menu, select Chooser. 2 Click the S330 icon and ensure S330 is
  • Canon S330 | S330 User's Guide - Page 171
    Troubleshooting Have you replaced an ink tank with a new one? is Displayed If the front cover has been open for a certain period, a confirmation message of ink tank replacement may be displayed before the next print job. s If the ink tank has been replaced with a new one: Click Yes to reset the ink
  • Canon S330 | S330 User's Guide - Page 172
    Low Ink Warning Displays Ink Tank with '?' Troubleshooting The ink level of an ink tank displayed with a '?' is not synchronised with its ink counter. The colour ink level may not be correctly displayed. BJ Status Monitor (Windows) BJ Status Dialog (Macintosh) The colour ink level may not be
  • Canon S330 | S330 User's Guide - Page 173
    Troubleshooting Macintosh Note ® When the background printing is enabled, the low ink warning displays on the BJ Print Monitor (Macintosh). ¬ BJ Print Monitor s Reset the ink counter from the printer driver when you replace the ink tank. ¬ Resetting the ink counter from the printer driver
  • Canon S330 | S330 User's Guide - Page 174
    Troubleshooting 2 On the Maintenance tab, click Low Ink Warning Setting icon. 3 Clear a check box of Display low ink warning off and click Send. Macintosh 1 Ensure the printer is on and open the Page Setup dialog box. The Page Setup dialog box can normally be opened by selecting Page Setup... in
  • Canon S330 | S330 User's Guide - Page 175
    Problems Unique to Windows • The BJ Status Monitor is Not Displayed • Cannot Print in Background (Windows 98/Windows Me only) Troubleshooting Windows Problems Unique to Windows 175
  • Canon S330 | S330 User's Guide - Page 176
    . ¬ Opening the Printer Properties dialog box directly from the Start menu 2 On the Details tab, click Spool Settings and select "Enable bi-directional support for this printer." In Windows 2000 or Windows XP, select "Enable bi-directional support" on the Ports tab. Problems Unique to Windows 176
  • Canon S330 | S330 User's Guide - Page 177
    Troubleshooting Cannot Print in Background (Windows 98/Windows Me only) s Check the amount of free space on the hard disk. Background printing requires a certain amount of disk space. You may need to delete unnecessary files, or disable background printing. s Ensure that background printing is
  • Canon S330 | S330 User's Guide - Page 178
    Problems Unique to the Macintosh • Jagged Text or Graphics, or Banded Gradations • Cannot Print in Background Troubleshooting Macintosh Problems Unique to the Macintosh 178
  • Canon S330 | S330 User's Guide - Page 179
    Troubleshooting Jagged Text or Graphics, or Banded Gradations s Ensure your application supports Quick Draw. If you are using a PostScript-compatible application, printed text and lines may appear jagged and gradations may appear banded. As S330 is not a PostScript printer but a Quick Draw printer,
  • Canon S330 | S330 User's Guide - Page 180
    Cannot Print in Background Troubleshooting s Ensure background printing is enabled. 1 In the Apple menu, select Chooser. 2 Click Backgrounding on. s Check the amount of free space on the hard disk. Background printing requires a certain amount of disk space. You may need to remove unnecessary files
  • Canon S330 | S330 User's Guide - Page 181
    Printing method: Bubble Jet on-demand Printing resolution: 2400 (horizontal) × 1200 (vertical) dpi. max. Print speed (printing with Canon standard pattern): Black printing Colour printing Draft: Standard: Draft: Standard: 14 ppm 10.5 ppm 10 ppm 4.7 ppm Print direction: Bi-directional Print
  • Canon S330 | S330 User's Guide - Page 182
    connector: USB standard Series B receptacle (USB interface) Recommended printer cable: Material: AWG28 (data wiring pair) or AWG20 to Series B pluggable Acoustic noise level: Approx. 45 dB (A) (in the highest print quality mode) Operating environment: Temperature: 5 to 35˚C (41 to 95˚F)
  • Canon S330 | S330 User's Guide - Page 183
    USA/Canada AC 120 V, 60 Hz Australia AC 240 V, 50 Hz Power consumption: Standby: Printing: Approx. 2 W Approx. 30 W Dimensions (without a paper rest and paper output tray): 390 (W) × 248 (D) × 185 (H) mm 15.35 (W) × 9.76 (D) × 7.28 (H) in Weight: Approx. 3.4 kg (7.48 lb.)
  • Canon S330 | S330 User's Guide - Page 184
    feed through auto sheet feeder For Plain Paper, Envelopes, High Resolution Paper, Glossy Photo Paper, High Gloss Photo Film, Glossy Photo Cards, Photo Paper Pro, Photo Paper Plus Glossy, Matte Photo Paper Transparencies, T-shirt Transfers, Banner Paper Specifications s Sheet feeder capacity: Plain
  • Canon S330 | S330 User's Guide - Page 185
    print media: Regular size: A4, A5, B5, Letter, Legal, European DL, US Com.#10 Custom size: width: 90.0 to 215.9 mm (3.54 to 8.5 in) height: 120.0 to 584.2mm (4.72 to 23.0 in) Weight: 64 to 105 g/m2 (17 to 28 lb) Canon Special media: High Resolution Paper Glossy Photo Paper High Gloss Photo
  • Canon S330 | S330 User's Guide - Page 186
    extended mode: Raster image format Resolution: Canon extended mode: 300, 600, 1200, 2400 dpi Specifications s Print Head: Black: 320 nozzles (600 dpi) Cyan, Magenta, Yellow: 128 nozzles per each colour (600 dpi) s Ink Tanks: Capacity: Black (BCI-24 Black) approx. 300*1, approx. 580*2 Colour
  • Canon S330 | S330 User's Guide - Page 187
    s Printer driver operating environment: IBM PC/AT-compatible computer running on Windows 98, Windows Me, Windows 2000, Windows XP or Macintosh computers with USB interface running on Mac OS 8.6 - Mac OS 9.X s Hard disk space: Approx. 15 MB to install on Windows 98 and Windows Me, 30 MB on Mac OS
  • Canon S330 | S330 User's Guide - Page 188
    Area To ensure the best print quality, the printer allows a margin along each edge of media. Printing area (dark blue): Canon recommends that you print within this area. () Printable area (light blue): The area where it is possible to print. However, printing in this area can adversely affect
  • Canon S330 | S330 User's Guide - Page 189
    101, GP-301 / GP-301N, PP-101 and MP-101, selection of "Borderless Printing" enables you to make prints with no margins. However, borderless printing may cause the top and bottom edges of paper to decrease in print quality or become soiled. (Under certain circumstances, the edges of the reverse side
  • Canon S330 | S330 User's Guide - Page 190
    3.0 mm / 0.12 in 28.0 mm / 1.1 in Specifications Recommended printing area Printable area 5.0 mm / 0.2 in 3.4 mm / 0.13 in 26.5 mm / 1.04 in 3.4 mm / 0.13 in 190
  • Canon S330 | S330 User's Guide - Page 191
    101, GP-301 / GP-301N, PP-101 and MP-101, selection of "Borderless Printing" enables you to make prints with no margins. However, borderless printing may cause the top and bottom edges of paper to decrease in print quality or become soiled. (Under certain circumstances, the edges of the reverse side
  • Canon S330 | S330 User's Guide - Page 192
    Envelopes Size European DL US Com. #10 3.4 mm / 0.13 in Specifications Printable Area (width x height) 190.5 × 103.2 mm / 7.5 × 4.1 in 211.8 × 98.0 mm / 8.3 × 3.9 in 3.4 mm / 0.13 in 3.0 mm / 0.12 in 26.5 mm / 1.04 in Printable area 192
  • Canon S330 | S330 User's Guide - Page 193
    Area (width x height) A4: 203.2 × 1774.0 mm / 8.0 × 69.8 in Letter: 203.2 × 1668.4 mm / 8.0 × 65.7 in 5.0 mm / 0.2 in 3.4 mm / 0.13 in Min. 2 sheets Max. 6 sheets Recommended printing area Printable area 193
  • Canon S330 | S330 User's Guide - Page 194
    Application Error B Background printing (Macintosh) Background printing (Windows) Banner Paper BCI-24 Black BCI-24 Color BJ Print Monitor (Macintosh) BJ Status Dialog (Macintosh) BJ Status Monitor (Macintosh) BJ Status Monitor (Windows) Booklet Printing Borderless Printing C Cancelling a Print Job
  • Canon S330 | S330 User's Guide - Page 195
    Media Types D Deep Cleaning Duplex Printing E Enabling Low Ink Warning Envelopes Error Message F Fit to Page Printing Front cover G Gamma Correction (Macintosh) General Protection Fault Glossy Photo Cards FM-101 Glossy Photo Paper GP-301N/GP-301 H High Gloss Photo Film HG-201 High Resolution Paper
  • Canon S330 | S330 User's Guide - Page 196
    Warning Displays Ink Tank with '?' M Matte Photo Paper MP-101 Media Type (Macintosh) Media Type (Windows) N Network (Macintosh) Nozzle Check Pattern O Opening the Printer Properties Dialog Box (Windows) P Page Setup Dialog Box (Macintosh) Page Size (Windows) paper feed roller Paper Guide Paper Jams
  • Canon S330 | S330 User's Guide - Page 197
    Photo Paper Pro PR-101 PICT File (Macintosh) Poster Poster Printing POWER Button POWER Lamp Preview before printing Print Advisor (Windows) Print Dialog Box (Macintosh) Print Head Holder Print Head Lock Lever Print Mode (Macintosh) Print server (Macintosh) Printable area Printer Driver (Macintosh
  • Canon S330 | S330 User's Guide - Page 198
    ) Specifications T Transparencies CF-102 Transporting the Printer T-Shirt Transfers TR-201 U Uninstalling Printer Drivers (Macintosh) Uninstalling Printer Drivers (Windows) USB Port V Vivid Photo W When to Replace Ink Tank and Maintain Print Head Index 69 18 15 52 30 181 121 91 123 66 41 16, 164
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
User’s Guide
BUBBLE JET PRINTER
V1