Canon SELPHY ES40 SELPHY ES40 Printer User Guide - Page 8

2 Open the cover.  Slide the cartridge cover lever in the direction of the arrow to open the cover. 3 protective paper Insert the cartridge.  With the protective paper facing towards you, insert the cartridge as shown in the illustration until it clicks into place.  Press the area on the cartridge cover marked PUSH to close.  Please use only genuine Canon Easy Photo Pack cartridges for SELPHY ES series printers. Cartridges for the CP series cannot be used.  Do not remove the colored protective paper that is installed in the cartridge.  Do not touch or pull on the ink sheet. Do not touch the cartridge with wet or sweaty hands. You may not be able to print if the ink sheet is damaged, dirty or wet. 10 cm (4 in.) or more 15 cm (6 in) or more Setting Up SELPHY air vents 15 cm (6 in) or more 10 cm (4 in.) or more  Place SELPHY on a stable and even surface, such as a table. Never place it on an unstable or tilted surface.  Keep SELPHY at least 1 m (3 ft.) from devices emitting electromagnetic waves or strong magnetic fields.  Leave more than 15 cm (6 in.) of clearance at the front and back of SELPHY, and 10 cm (4 in.) on both sides.  Do not block the air vents on the back of the printer.  Never place SELPHY close to motors or other devices that generate strong electromagnetic fields. This may damage or cause the printer to malfunction.  Do not place near television or radio. This may cause the printer to malfunction. Connecting SELPHY Plug the cord into SELPHY.  Fully insert the power cord into SELPHY's terminal.  Insert the electric plug into an outlet.