Canon VB-S805D Mark II Mobile Camera Viewer Operation Guide
Canon VB-S805D Mark II Manual
 |
View all Canon VB-S805D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon VB-S805D Mark II manual content summary:
- Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 1
Mobile Camera Viewer Operation Guide How to Read This Manual This manual contains instructions on Mobile Camera Viewer operations. For details on camera settings, camera precautions and limitations, refer to the camera Operation Guide. Available functions will differ depending on the camera. Some - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 2
/Stopped button 16 (4) PTZ Control button 17 (5) Control/Release button 19 (6) Disconnect button 19 (7) Settings button 20 (8) Control for Admin button 24 (9) Snapshot button 28 Troubleshooting 30 2 - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 3
. For information on tested mobile devices, please refer to the camera's Operation Guide. Note 3D Touch on iOS devices is not supported. Trademarks ● Surface is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries. ● iPad and iPhone are trademarks - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 4
Connecting to the Camera Use the device's web browser to connect to the camera and launch Mobile Camera Viewer. 1 Launch browser and enter the camera's IP address. One of the following screens appears. To log into an account that requires user authentication (left screen), enter the user name and - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 5
Note ● The following authentication dialog box appears when the camera's [Settings Page] > [Basic] > [Viewer] > [Default Page] is set to [Display Settings Page]. Consult the camera's administrator and verify whether [Default Page] is set to [Display Viewer]. ● Even if the screen on the right of the - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 6
● If you open another window or tab to access the camera while an authenticated web page is displayed, the authentication information of the displayed web page may be discarded. In this case, enter the authentication information again. 6 - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 7
Main Screen (1) (2) (3) (1) Video Display Area Displays video received from the camera. (2) Information bar Displays information, warnings, and error messages. (3) Control panel (P. 13) Displays buttons for controlling the camera. 7 - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 8
Note The Mobile Camera Viewer's video cannot rotate even when the camera's [Settings Page] > [Basic] > [Viewer] > [Rotate Video Display] is set to [Rotate clockwise 90 degrees] or [Rotate counterclockwise 90 degrees]. If you want to display video in portrait orientation, turn off your mobile device - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 9
Operating the Camera Camera control privileges are required to operate the camera. You have camera control privileges when [Release] is displayed. When [Control] is displayed, tap it to obtain camera control privileges. Operations in the Video Display Area ●Scroll Bar Controls (1) (3) (2) (1) Scroll - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 10
as follows. Without an enhanced digital zoom range With an enhanced digital zoom range (i) (i) (ii) (iii) (i) Digital zoom range The higher the zoom ratio, the lower the video quality becomes. (ii) Position where zooming pauses (iii) Enhanced digital zoom range ●Screen Tap Operations When you - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 11
Note ● You can also operate the camera with the PTZ control panel (P. 17). ● If the video is not displayed, tap the video display area to try reconnecting to the camera. 11 - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 12
●Drag to Move In the video display area, swipe in the direction you would like to change the camera angle. An arrow will appear and the camera angle will change in the direction of the arrow. Increasing the length of the arrow will increase the movement speed. Note This function is not available - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 13
● Double-tapping while viewing magnified video cancels magnified display. ● will appear in the upper part of the video display area while viewing magnified video. Main Screen Control Panel (1) (2) (3) (4) (9) (5) (8) (6) (7) (1) Preset button (P. 15) Camera settings, such as the camera angle - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 14
(3) Recording Started/Stopped button (P. 16) Starts or stops recording. (4) PTZ Control button (P. 17) Displays the PTZ Control panel. (5) Control/Release button (P. 19) Enables or disables camera control privileges. (6) Disconnect button (P. 19) Disconnects from the camera. (7) Settings button (P. - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 15
(1) Preset button Camera settings, such as the camera angle or exposure, are changed to presets registered in advance. (2) Home Position button Camera settings, such as the camera angle or exposure, are returned to the home position registered in advance. Note Register the preset or home position - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 16
(3) Recording Started/Stopped button Tap the button to start recording to the memory card. Tap again to stop recording. Displayed when recording Note ● When there is 20 MB or less available space on a memory card, a message appears and recording stops. ● The recorded video cannot be viewed in Mobile - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 17
(4) PTZ Control button Displays the PTZ Control panel. (i) (ii) (iii) (iv) (v) (i) Scroll Bar button Displays/hides scroll bars in the video display area for controlling pan, tilt, and zoom operations (P. 9). (ii) Center Position button Moves the camera position to the center of the pan and tilt - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 18
(iii) Pan/Tilt control button Touch and hold to pan in that direction. Release your finger to stop. Touch and hold to tilt in that direction. Release your finger to stop. (iv) Zoom control button Touch and hold to zoom in (telephoto), and touch and hold to zoom out (wide angle). Release your - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 19
(5) Control/Release button Tap to obtain control. Tap again to release control. Displayed when camera control privileges have been obtained Note The camera cannot be controlled by multiple users simultaneously. Only the user with control privileges can control the camera. (6) Disconnect button - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 20
(7) Settings button Allows you to configure preset, incoming video size, and maximum frame rate settings. ●Preset Settings You can register current camera settings, such as the camera angle or exposure, as presets. Presets can also be deleted. 20 - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 21
[Register Preset] Select a preset number from [Register to], select [Registered Content], enter a preset name, and then tap [Register]. Note If you select [Home Position] in [Register to], you can set the home position. 21 - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 22
[Delete Preset] Select a preset to delete and then tap [Delete]. ●Incoming Video Settings Select whether to receive digital PTZ cropped video and select the size of the received video. 22 - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 23
●Maximum Frame Rate Settings You can set a maximum frame rate for video received from the camera. 23 - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 24
(8) Control for Admin button Allows you to configure focus, exposure, Clear IR Mode, day/night, and external device output settings. ●Focus [Auto] Automatically focuses on the subject. 24 - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 25
] Tapping the button automatically adjusts the focus once, and then switches to the manual mode. You can touch and hold the (Far) and (Near) buttons to adjust the focus position in the far and near directions, respectively. [Fixed at - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 26
Note This cannot be configured when [Settings Page] > [Camera] > [Initial Settings] > [Exposure] is set to [Manual] or [Smart Shade Control] is set to [Auto]. ●Clear IR Mode Select whether to use Clear IR Mode. Selecting [ON] changes the video to monochrome - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 27
[Day Mode] Color video can be viewed in the normal mode. [Night Mode] Video is shown in black and white, due to the disabling of the infrared filter. Note This can only be configured when [Clear IR Mode] is set to [OFF]. ●External Device Output You can control the output to an external device - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 28
(9) Snapshot button Captures the image in the video display area, and saves the still image to the device. Snapshot panel 28 - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 29
●Saving a Snapshot ●Closing the Snapshot Panel Tap . 29 - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 30
Troubleshooting Cannot connect to camera ● Check to make sure the user name and password are correct. ● Check to make sure upper-case letters have not been - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 31
Viewer disconnects ● If the video is not displayed, tap the video display area to try reconnecting to the camera. ● Connections from authorized users and guest users are disconnected while creating a panorama image. ● Check the camera, network and device for any abnormality. ● Reboot the device and - Canon VB-S805D Mark II | Mobile Camera Viewer Operation Guide - Page 32
Display is slow ● The display may be slow for approximately the first minute using an SSL connection. BIE-7099-004 © CANON INC. 2018
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
Be sure to read this Operation Guide
before using the network camera.
Mobile Camera Viewer
Operation Guide
How to Read This Manual
This manual contains instructions on Mobile Camera
Viewer operations.
For details on camera settings, camera precautions
and limitations, refer to the camera Operation Guide.
Available functions will differ depending on the
camera. Some operations will not be available on
unsupported cameras even when functions are
mentioned in this manual.
The following icons are used to represent tap
gestures in this manual.
The screen images used in this manual are samples used for
explanation purposes. They may differ from the actual
screens that are displayed.
Screens from iOS are used as an example.
Tap
Touch and hold
ENGLISH