Canon VIXIA HF M50 VIXIA HF M50 / HF M52 / HF M500 Instruction Manual - Page 208

Sound is distorted or is recorded at lower levels. - When recording near loud sounds (such as fireworks, shows or concerts), sound may become distorted or it may not be recorded at the actual levels. Activate the microphone attenuator (A 188) or adjust the audio recording level manually (A 118). There are brief stops in the sound recorded with the optional WM-V1 Wireless Microphone. - This may occur if the LOCK switch on the Eye-Fi card was set to prevent writing, causing wireless communication to occur while recording. Change the position of the LOCK switch. The picture is displayed correctly but there is no sound from the built-in speaker. - Speaker volume is turned off. Adjust the volume. - If the HTC-100/S HDMI Cable or optional STV-250N Stereo Video Cable is connected to the camcorder, disconnect it. - The AV terminal is set to headphone output. Set r> [AV/Headphones] to [AV]. Memory Card and Accessories Cannot insert the memory card. - The memory card was not facing the correct direction. Turn the memory card over and insert it. Cannot record on the memory card. - The memory card is full. Delete some recordings (A 60, 134) to free some space or replace the memory card. - Initialize the memory card (A 41) when you use it with the camcorder for the first time. - The LOCK switch on the memory card is set to prevent accidental erasure. Change the position of the LOCK switch. - A compatible memory card must be used to be able to record movies on a memory card (A 37). - The folder and file numbers for MP4 movies and photos have reached their maximum value. Set r>[File Numbering] to [Reset] and insert a new memory card. The optional WL-D89 Wireless Controller will not work. - Set q> [Wireless Remote Control] to [On]. - Replace the battery of the wireless controller. 208 Š Additional Information