Canon VIXIA HF M50 VIXIA HF M50 / HF M52 / HF M500 Instruction Manual - Page 217

Some scenes were recorded using another device and cannot be copied. - Scenes that were not recorded with this camcorder cannot be copied to the memory card. Task in progress. Do not disconnect the power source. - The camcorder is updating the memory. Wait until the operation ends and do not disconnect the compact power adapter or remove the battery pack. There are no scenes with the selected rating - No scenes have been rated yet. Rate the scenes as you like (A 80). - The criteria you used to select scenes by rating resulted in no applicable scenes. Change the criteria used to select scenes by rating. This memory card contains scenes. Delete all scenes to use relay recording. - Save your movies (A 146) if necessary, and delete all the movies from the memory card (A 60). This photo cannot be displayed - You may not be able to display photos taken with other devices or image files created or edited on a computer. To record video on this memory card, it is recommended to use a recording mode other than MXP or FXP - Movies may not be recorded correctly on this memory card if the recording mode is set to MXP or FXP mode (A 91). Too many photos and MP4 movies. Disconnect the USB cable. - Disconnect the USB cable. Try using a memory card reader or decrease the number of photos and MP4 movies on the memory card to fewer than 2,500 (Windows), or 1,000 (Mac OS). - If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and restore the connection after a short while. -/, Total play time is too long - When converting scenes from a story, the maximum total playback time of the scenes to be converted is 12 hours. Reduce the number of scenes to be converted to SD. Unable to recognize the data - You transferred data to the camcorder recorded using a video configuration that is not supported (PAL or SECAM). Play back the recordings with the device originally used to record them. Unable to recover data - Could not recover a corrupted file. Save your recordings (A 146) and initialize the memory using the [Complete Initialization] option (A 41). Unsupported gallery data detected. Cannot record or edit. Delete gallery data? - The gallery data of the movies in the selected memory card is not supported. The movies can be played back but you cannot edit them or record additional scenes to this gallery. Select [Yes] to delete the unsupported gallery data. Note that after doing so, you will not be able to play back the movies with the device originally used to record the unsupported gallery data. Additional Information Š 217