Canon ZR 800 ZR800 Instruction Manual - Page 16
Installing the Backup Battery, to release the battery - power supply
UPC - 013803078190
View all Canon ZR 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 Getting Started • The CHARGE indicator starts flashing. The indicator will stay on when the charging is completed. • You can also use the compact power adapter without attaching a battery pack. • When the compact power adapter is connected, even if a battery is attached its power will not be consumed. ONCE THE BATTERY IS FULLY CHARGED 1 Disconnect the compact power adapter from the camcorder. 2 Unplug the compact power adapter from the power outlet. TO REMOVE THE BATTERY PACK Press BATT. to release the battery pack. Lift the battery pack and then pull it out. IMPORTANT You may hear some noise from the compact power adapter during use. This is not a malfunction. We recommend charging the battery pack in temperatures between 10 °C and 30 °C (50 °F and 86 °F). Outside the temperature range of 0 °C to 40 °C (32 °F to 104 °F), the charging will not start. Do not connect to the camcorder's DC IN terminal or to the compact power adapter any electrical equipment that is not expressly recommended for use with this camcorder. To prevent equipment breakdowns and excessive heating, do not connect the supplied compact power adapter to voltage converters for overseas travels or special power sources such as those on aircraft and ships, DC-AC inverters, etc. Flashes approx. once per second: Battery less than 50% charged. The charging time will vary depending on the surrounding temperature and the battery pack's initial charge condition. In cold places, the effective usage time of the battery will decrease. We recommend that you prepare battery packs 2 to 3 times longer than you think you might need. U.S.A. and Canada only: The lithium ion/polymer battery that powers this product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. Installing the Backup Battery The backup battery (lithium button battery CR1616) allows the camcorder to retain the date, time ( 21) and other camcorder settings while the power source is disconnected. Connect a power source to the camcorder when replacing the backup battery to retain the settings. NOTES The CHARGE indicator also serves as a rough estimate of the battery charge status. Continuously on: Battery fully charged. Flashes approx. twice per second: Battery over 50% charged. 1 If a battery pack is attached, remove it first. 2 Open the backup battery cover.