Canon ZR 800 ZR800 Instruction Manual - Page 25
Playback, Basic Functions, If the joystick guide does not, appear on screen, press, display it. - problems
UPC - 013803078190
View all Canon ZR 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Playback 25 Basic Functions Playback Playback Playing Back Movies Play back the tape on the LCD display or close the LCD panel to use the viewfinder. You can also turn the LCD panel and close it with the screen facing out. ( 9) 1 Holding the lock button pressed down, set the switch to PLAY. 2 If the joystick guide does not appear on screen, press ( ) to display it. 3 Locate the point where you want to begin the playback. Push the joystick ( ) towards to rewind the tape or ( ) towards to fast forward. 4 Push the joystick ( ) towards / to begin the playback. DURING PLAYBACK 5 Push the joystick ( ) towards / again to pause the playback. 6 Push the joystick ( ) towards to stop the playback. TO ADJUST THE VOLUME 1 Press FUNC. . 2 Select ( ) [ SPEAKER VOLUME] and adjust ( ) the volume. • The sound from the built-in speaker will be muted when you close the LCD panel or while the STV-250N Stereo Video Cable is connected to the AV terminal. • If you turn off the volume completely, the icon will change to . 3 Press FUNC. to close the menu. SPECIAL PLAYBACK MODES There is no sound during the special playback modes. Fast Playback: Push the joystick ( ) towards or ( ) towards . Hold the joystick pressed down to rewind/fast forward the tape while continuing the playback. NOTES You can display the date and time of the recording ( 39). During some special playback modes, you may notice some video problems (blocky video artifacts, banding, etc.) in the playback picture. To protect the tape and video heads, the camcorder will enter the stop mode ( ) if left in playback pause ( ) mode for 4 minutes 30 seconds. To resume the playback push the joystick ( ) towards / .