Canon ZR200 DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual
Canon ZR200 Manual
View all Canon ZR200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon ZR200 manual content summary:
- Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 1
DV Network Software Instruction Manual Version 2 E This software is for use with Windows® XP only. - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 2
DV Messenger. Is Windows XP and Does Windows Windows Messenger Messenger operate and 4.5, 4.6 or 4.7 can its voice or video installed? Yes conversation function Yes be used? (Please consult Microsoft for details on Windows Messenger.) No No This software is compatible with Windows XP - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 3
This software requires an UPnP compatible router. It cannot be used with other routers. For details, consult your Internet service provider, telephone carrier or router manufacturer, or refer to the manual of the router. Follow now the instructions in this manual and install DV Messenger. Before - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 4
, installing, executing or displaying) the SOFTWARE on a single computer solely for use with Canon's digital video camcorder products. You may physically transfer the SOFTWARE from one computer to another, provided that the SOFTWARE is used on only one computer at a time. You shall not install - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 5
. No updates, fixes or support will be made available for the SOFTWARE. 6. LIMITED WARRANTY AND DISCLAIMER OF LIABILITY It is your responsibility to choose, maintain and match the hardware and software E components of your computer system. Thus, Canon does not guarantee uninterrupted service or - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 6
copies thereof. In addition, Canon may enforce its other legal rights. 8. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE The SOFTWARE is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of "commercial computer software" and "commercial computer software documentation - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 7
DV Network Software 17 Installing the Canon USB Video Driver 19 Installing the AV/C Camera Storage Subunit-WIA Driver 20 Connecting the Camcorder to a Computer 23 Connecting the Camcorder Using a USB Cable 23 Connecting the Camcorder Using a DV Cable 23 DV Messenger Preparations for DV - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 8
from the tape to the computer 69 Recording movies to the tape 70 Uninstalling the Canon USB Video Driver 71 AV/C Camera Storage Subunit-WIA Driver Uninstalling the AV/C Camera Storage Subunit-WIA Driver 73 Troubleshooting DV Messenger ...75 Canon USB Video Driver 86 AV/C Camera Storage Subunit - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 9
for Windows Image Acquisition. WIA is a driver software for downloading images from digital devices onto a computer. WIA is preinstalled on Windows XP. © Canon Inc. 2005 All rights reserved. Safety Precautions Do not play the supplied CD-ROM(s) in any CD player that does not support data - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 10
back video and sound recorded on a tape. - CARD PLAY mode: Mode for playing back images recorded on a memory card. - NETWORK mode: Mode for connecting to the computer for using DV Messenger. • The explanations in this manual refer to camcorders equipped with the NETWORK mode on the POWER switch - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 11
Disk Space: • DV Messenger: 100 MB or more • Canon USB Video Driver: 1 MB or more • AV/C Camera Storage Subunit-WIA Driver: 1 MB or more Display: 800 u 600 pixels/High Color (16 bit) or better Others: Windows Messenger Version 4.5, 4.6 or 4.7, sound function, Internet connection* * Using - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 12
). - Remotely accessing the computer (View & Record). Canon USB Video Driver ( 19) Installing the Canon USB Video Driver allows you to use DV Messenger by connecting the camcorder to the computer using a USB cable. If your camcorder is listed under category A in Camcorder Categories ( 13), you - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 13
) Camcorder operation ( 49) Sharing images ( 53) Image Capture ( 57) View & Record ( 62) Canon USB Video Driver USB Connection ( 19) Capturing/Recording movies ( 69) When sharing images, an image file exceeding 20 MB will not be displayed. What Can Be Accomplished with the Software 13 - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 14
Required Accessories You need following items for using the Software: • Digital Camcorder • The Internet connection and a software that allows you to browse the Net • USB Cable or DV (IEEE1394) Cable If your camcorder is not listed under category A or B in Camcorder Categories ( 13), use a DV cable. - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 15
a long time, heat generation may cause damage to the camcorder. Turn off the camcorder after use. Tapes may be damaged if left in the camcorder for a long time. Do not leave tapes E in the camcorder to prevent damage. If you leave the camcorder turned on for a long time (e.g. when using the View - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 16
Device" ( 26). For details, consult your Internet service provider, telephone carrier or router manufacturer, or refer to the manual of the router. Be aware that yoour contact can access the contents of te tape or memory card in your camcorder when using DV messenger. 16 Requirements for Using - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 17
the Software Installing the DV Network Software E With this procedure, the DV Messenger will be installed and the driver files for the AV/C Camera Storage Subunit-WIA Driver and Canon USB Video Driver will be copied to your computer. The drivers will be installed when you connect the camcorder to - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 18
check mark next to [Copy Canon USB Video Drivers]. • If your camcorder is listed under category E or F in Camcorder Categories ( 13), remove the check mark next to [Copy AV/C Camera Storage Drivers]. 6 Read the license agreements and click [Yes]. 7 When the confirmation window appears, click [Yes - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 19
and installation is complete. E Installing the Canon USB Video Driver Installing the Canon USB Video Driver allows you to use DV Messenger by connecting the camcorder to a computer using a USB cable. To use the Canon USB Video Driver for using DV Messenger, your camcorder has to be listed under - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 20
the DV Network Software first to copy the driver files to the computer. Close all programs that are running before installing the driver. Do not turn off the camcorder until the driver installation is complete. And do not interrupt the installation. Users of Windows XP Professional must - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 21
computer not to start any application. 1 Connect the power adapter to the camcorder. 2 Set the camcorder to NETWORK or CARD PLAY mode. 3 Connect the camcorder to the computer using the DV cable ( 23). 4 From the [start] menu, select [My Computer]. 5 Right-click the mouse button on the [Canon Camera - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 22
you connect the camcorder to the computer the next time. To start a WIA-compliant application automatically, select [Start this program] and click [OK]. If the started application displays a message such as [TWAIN data source not found. Reinstall the scanner software.], select [WIA-Canon Camera - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 23
use a DV cable or a USB cable to connect your camcorder to the computer. With other camcorders, use a DV cable. E Connecting the Camcorder Using a USB Cable Make sure to install the DV Network Software before connecting the camcorder to the computer. Make sure the camcorder is being powered by - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 24
the computer. Users of Windows XP Professional must first log in as an Administrator to use DV Messenger. Checking the Camcorder Connection 1 Connect the power adapter to the camcorder. 2 Set the camcorder to NETWORK mode. (Camcorder without NETWORK mode: Set the camcorder to CAMERA mode.) 3 Connect - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 25
are connecting a Canon camcorder using a DV cable, check if [Canon DV Device] is displayed. • If [Canon DV Device] or [Canon USB Video] does not appear, click to display the device list and check if it is listed. • If [Canon DV Device] or [Canon USB Video] is not listed, install Windows XP Service - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 26
UPnP Router If you are using an UPnP-compliant router to connect to the Internet, you need to install UPnP and disable the firewall of Windows XP to use DV Messenger. Installing UPnP 1 From the [start] menu, select [Control Panel]. 2 Click [Network and Internet Connections]. 26 Preparations for - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 27
DV Messenger 3 Click [Network Connections]. E 4 From the [Advanced] menu, select [Optional Networking Components] from the displayed menu. 5 Select [Networking Services] and click [Details]. Preparations for DV Messenger 27 - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 28
and Play]. • If you have installed Windows XP Service Pack 2, place a check mark next to [Internet Gateway Device Discovery and Control Client] and [UPnP User Interface]. 7 Click [Next]. Installation starts. 8 When installation is complete, restart your computer. After restart, repeat steps 1 to - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 29
on your E computer, or write files onto your hard disk. Disable the firewall before using DV Messenger, and make sure to re-enable the firewall after use. 1 From the [start] menu, select [Control Panel]. DV Messenger 2 Click [Network and Internet Connections]. Preparations for DV Messenger 29 - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 30
3 Click [Network Connections]. 4 Select [Local Area Connection], right-click the mouse button and select [Properties]. 30 Preparations for DV Messenger - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 31
case, the firewall function of an Internet security software or anti-virus software may be active. For instructions on how to disable the firewall function, consult the software or computer manufacturer. To enable the firewall after using DV Messenger, repeat steps 1 to 4 and place the checkmark - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 32
Do not access the memory card using programs such as Windows Explorer while DV Messenger is started. Do not update Windows Messenger while DV Messenger is started. Do not connect two or more digital camcorders to the computer. Do not disconnect the interface cable while DV Messenger is started - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 33
to sign in]. DV Messenger DVM Panel Windows Messenger To use DV Messenger, both you and your contact need to be online. - If your contact is already online when you sign in: A message will be sent automatically to your contact notifying that you have signed in. Message on the Computer Screen of - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 34
. Connect speaker or headphones as necessary. As microphone, use the microphone of the camcorder. 1 Set the camcorder to NETWORK mode. (Camcorder without NETWORK mode: Set the camcorder to CAMERA or PLAY (VCR) mode.) When you have set the camcorder to PLAY (VCR) mode, play back the tape. 2 Open - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 35
[Next]. If you are connecting a Canon camcorder using a USB cable, select [Canon USB Video]. If you are connecting a Canon camcorder using a E DV cable, select [Canon DV Device]. 5 When the video picture appears, click [Next]. In NETWORK or CAMERA mode, the live video appears. In PLAY (VCR - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 36
7 Set [Microphone] and click [Next]. • If you are connecting a Canon camcorder using a USB cable, select [Canon USB Video]. If you are connecting a Canon camcorder using a DV cable, select [Canon DV Device]. • The installed sound device appears for [Speaker]. Proceed with the setting unchanged. 8 - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 37
or you can accept an invitation from your contact. If you connect to the Internet after starting DV Messenger, the connection may fail. Make sure to connect to the Internet first before starting DV Messenger. An error message may appear and the communication may not work correctly. In such - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 38
the DVM panel. Video picture of your contact's camcorder Video picture of your camcorder • If your contact does not respond within 30 seconds after you press [Select], the connection will be canceled, and a message is automatically sent to your contact asking to download DV Messenger Version 2. 38 - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 39
on and selects you as the contact, a connecting request appears on your computer screen. 1 When the connecting request dialog appears, click [Yes]. E The communication between your and your contact's DV Messenger starts and you can now operate the camcorder of your contact from the DVM panel - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 40
Ending DV Messenger Disconnecting DV Messenger 1 Click . 2 When the confirmation window appears, click [YES]. The communication with your contact ends. If you wish to communicate with another contact, click and select a contact from the list. Ending DV Messenger 1 Click the DV Messenger - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 41
Displays DVM Panel E This is DV Messenger's control panel. Use the buttons on this window to operate the camcorder connected to your computer and the camcorder connected to the computer of your contact. 16 7 2 11 12 9 9 3 4 DV Messenger 10 5 8 1 [MY CAMERA] Click here to display the - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 42
control prohibited. appears when the camcorder is connected using a DV (IEEE1394) cable, and when using a USB cable. Here you find the buttons for various settings ( 43). Displays the camcorder model names ([Canon MiniDV] appears with camcorder models released before 2001). Displays the - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 43
displays the [Select a contact] window ( 37). When you are connected, appears. Clicking the button displays a window asking you to confirm disconnection ( 40). 2 Allow Remote Control Click here to select whether you allow your contact to operate your camcorder. You can check the current - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 44
Messenger is started, the [DV Messenger] task and [DV Messenger] icon appear on the taskbar. 1 2 1 DV Messenger task 2 DV Messenger icon Appears when the DVM panel is displayed or minimized. If the DVM panel is minimized, click here to display it. A list of menus - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 45
& Record 4 Stop View & Record 5 Connect 6 Disconnect 7 Open DVM panel 8 Exit Displays the version of DV Messenger. Displays DV Messenger's help topics. Starts the View & Record function ( 62). Ends the View & Record function ( 62). Displays the [Select a contact] window and starts the communication - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 46
(VCR) or the switch between the modes. (CARD) tab to Camcorder without NETWORK Mode With camcorders not equipped with the NETWORK mode, you have to change the position of the POWER switch to change the mode of the camcorder. The settings for camera and microphone in the [Audio Tuning Wizard] may - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 47
DV Messenger 3 Wait until the video picture and camcorder information such as the tape counter appear on the camcorder screen and click [Start Camera]. E A message with the options [Accept] and [Decline] appears in the [Conversation] window of your contact. If your contact clicks [Accept], the - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 48
of the communication line during videoconference, video picture may appear interrupted or sound may be delayed. If you have started an application program which is accessing the memory card such as the Scanner and Camera Wizard, you may not be able to operate the camcorder. In such case, close the - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 49
's camcorder: Click the [CONTACT] tab followed by the (CAMERA) tab. (If your contact has a camcorder without NETWORK mode, click the [CONTACT] tab. The camcorder of your contact must be set to CAMERA mode for you to control the camera functions.) DV Messenger Operating Camcorders with DV Messenger - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 50
the camcorder is set to manual focus in View & Record mode, the camcorder switches to autofocus for about 10 seconds. This button appears only on the [Contact] control panel in View & Record mode. Click here to record the live video picture as a still image on the memory card. (Only camcorders with - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 51
Functions When you play back a tape on your camcorder, you can send recorded video and sound to your contact. You can also control the playback functions from the DVM panel while monitoring the picture in the [Conversation] window. E You cannot send video or sound recorded in extended - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 52
b. Reverse x2 Playback c. Reverse Playback d. Slow Reverse Playback e. Playback Pause f. Slow Forward Playback g. Forward Playback h. Forward x2 Playback a bcd e f ghi i. Fast Forward Playback 9 Tape information Displays the time code of the tape. 52 Operating Camcorders with DV Messenger - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 53
images recorded on a memory card in a camcorder. E Image Sharing can only be used with camcorders equipped with the NETWORK mode or file transfer function. If the camcorder is connected using a DV cable, the AV/C Camera Storage Subunit-WIA driver contained in the DV Network Software needs to be - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 54
on the memory card appear. 4 Select the image you wish to share by placing a checkmark to the next to the thumbnail. • Click [Select all] to place a checkmark next to all images. • Click [Clear all] to remove all checkmarks. • indicates a still image, a movie. • Click [Refresh] to update the - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 55
select images from the memory card in the camcorder of your contact and transfer them to your computer. You cannot transfer files from your contact in the following cases: E - If no memory card is inserted into the camcorder of your contact. - If the memory card in the camcorder of your contact - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 56
to all images. • Click [Clear all] to remove all checkmarks. • If you move the mouse pointer on may not appear with images not recorded with the camcorder of your contact. 5 When you have selected The selected image(s) will be transferred to your computer. • The transferred image will be saved to - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 57
recording. When you click [Cancel], the images will not be transferred to the computer. If you are connecting the camcorder using a USB cable, video and sound will not be transferred to the computer while the camcorder is recording a still image. It returns to normal when recording is complete - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 58
Setting of Image Capture Window 1 2 3 4 5 6 1 Store 2 File name 3 Image size 4 Shutter sound 5 Continuous image. You can select between 640 x 480 pixels (VGA) and the maximum compatible size of the camcorder. You can select the shutter sound. If you wish to add a new sound, click [Add], select - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 59
Continuous Interval Clicking [Capture] records one single still image on the computer. Clicking [Capture] records a continuous series of still images. The of still images can be selected in the [Setting of image capture] window ( 57). Clicking [Capture] records single still images at intervals. The - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 60
Capturing with Your Camcorder 1 Click the [MY CAMERA] tab followed by the tab. 2 Click [Capture]. The display changes based on the capture mode. (CAMERA) In Single and Continuous mode, the DVM Viewer window appears allowing you to review the captured still images. File name Number of still images - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 61
by the 2 Click [Capture]. (CAMERA) tab. E DV Messenger The display changes based on the capture mode and the status will be displayed. The same information is displayed on your contact's screen. In Single and Continuous mode, the DVM Viewer window appears allowing you to review the captured still - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 62
Setting of View & Record Before you can remotely access the camcorder, you have to select the remote account that can access the camcorder. 1 Set the camcorder to NETWORK mode, connect it to the computer, start DV Messenger and sign in to Windows Messenger using the home account. The View & Record - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 63
be memorized even if you close DV Messenger. DV Messenger Starting View & Record You have to set DV Messenger at home to standby mode for remote access. 1 Set the camcorder to NETWORK mode, connect it to the computer, start DV Messenger and sign in to Windows Messenger using the home account - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 64
not close DV Messenger or Windows Messenger while View & Record is started, and keep camcorder and computer turned on. If [System standby] or [System hibernates] is activated in [Power Options] on your computer, deactivate it. For details on changing the setting, consult the computer manufacturer or - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 65
]. • DV Messenger will be connected and Windows Messenger's E [Conversation] window appears. • The home account will not appear if it is not registered in the contact list. In such case, add the home account to the contact list. During View & Record, the camcorder is set to manual focus - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 66
and click [Delete]. Only a part of the image may appear depending on the size of the image. Depending on the size of the Windows Messenger window, image and characters may overlap. If the background is set to a color other than white, the image may not appear correctly. Use the following - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 67
followed by the [Advanced] button. 5. On the [Advanced Appearances] window, select [Window] for [Item], and check if [Color 1] is set to white will be memorized even when you close DV Messenger. 1 Click menu. and select [DVM panel control] from the displayed DV Messenger 2 Place a checkmark next - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 68
if it is not required anymore. Close all programs that are running before uninstalling the software. 1 From the [start] menu, select [All Programs], [Canon Utilities], [DV Messenger] and [DV Messenger Uninstall] in succession. 2 On the confirmation dialog, click [Yes]. The uninstall utility starts - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 69
Load a recorded cassette. Make sure that "AV DV" is not displayed. 3 Connect the camcorder to the computer using the USB cable ( 23). Start DV Messenger and capture movies to the computer. For details, refer to the Windows Movie Maker 2 Help menu. Canon USB Video Driver Capturing/Recording Movies - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 70
to PLAY (VCR) mode. Make sure that "AV DV" is not displayed. 2 Load a blank cassette. 3 Connect the camcorder to the computer using the USB cable ( 23). Start DV Messenger and record movies to the tape. For details, refer to the Windows Movie Maker 2 Help menu. 70 Capturing/Recording Movies - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 71
is listed under category B in Camcorder Categories ( 13): Set the camcorder to NETWORK mode and connect it to the computer using the DV cable. 3 From the [start] menu, select [Control panel]. 4 Click [Printers and Other Hardware]. Canon USB Video Driver Uninstalling the Canon USB Video Driver 71 - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 72
of the Canon USB Video Driver ([Canon USB Video Control] and [Canon USB Video Record]) will not be uninstalled with above procedure. To uninstall [Canon USB Video Control] and [Canon USB Video Record], see Uninstallation of the Canon USB Video Driver and AV/C Camera Storage Subunit-WIA Driver ( 87 - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 73
anymore. Close all programs that are running before uninstalling the driver. 1 Connect the power adapter to the camcorder. 2 Set the camcorder to NETWORK or CARD PLAY mode and connect it to the computer using the DV cable. If Scanner and Camera Wizard or Explorer are open, close them. 3 From the - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 74
of the Canon USB Video Driver and AV/C Camera Storage Subunit-WIA Driver ( 87). 6 Right-click the [Canon Camera Storage Device] icon and select [Delete]. When the icon does not appear, see Uninstallation of the Canon USB Video Driver and AV/C Camera Storage Subunit-WIA Driver ( 87). 7 In - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 75
the Canon USB Video Driver and AV/C Camera Storage Subunit-WIA Driver ( 87) DV Messenger Connection Canon camcorder: [Canon USB Video] or [Canon DV Device] does not appear in the [Audio Tuning Wizard] dialog. Î Check if the camcorder is correctly connected to the computer using the USB cable or DV - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 76
connected to the computer with the USB cable or DV cable. Î Windows Messenger may not be able to receive video and sound if you have changed the operating mode of the camcorder during videoconference. Click [Stop Camera] and then [Start Camera] to restart the videoconference. Î Some Canon camcorders - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 77
Tuning Wizard]. Click [Start Camera] to restart the videoconference. I receive the video picture of my contact in the [Conversation] window E of Windows Messenger, but not the sound. Î If your contact is using a camcorder without NETWORK mode supporting the memory card function, ask if the - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 78
to a tape (e.g. the TAPE/CARD switch is set to TAPE). Î Check the position of the microphone volume lever. Move the lever to the right until the volume indicator on the right operates. Î If you are using a Canon camcorder, click [Stop Camera] and check whether [Canon USB Video] or [Canon DV Device - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 79
The video picture of Windows Messenger's [Conversation] window does not appear smooth. Î If Windows XP Service Pack 2 and [QoS Packet Scheduler] are installed, the video picture send by your contact may not appear smooth (e.g. the video picture stops and then appears to be fast-forwarded). In - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 80
Open the network properties. • When you are connecting to the Internet via LAN cable, right-click the [Local Area Connection] icon under [LAN or High-Speed Internet] and select [Properties] from the displayed menu. However, when you are connecting your computer directly to an ADSL modem, right-click - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 81
, click [OK] and restart the computer. There is an echo on the tape is set to playback pause or played back using playback control. Î Depending on the camcorder, Windows Messenger may produce anomalous noises such as buzzing sound when you pause playback or use playback control. Troubleshooting - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 82
contact has installed Windows XP Service Pack 2 and the [QoS Packet Scheduler], the connection to your contact may fail, or DV Messenger may fail when you try to operate your contact's camcorder. In such case, refer to [The video picture of Windows Messenger's [Conversation] window does not appear - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 83
with images not recorded with a Canon camcorder. Î Check if the memory card cover is open. Î If you are connecting via a DV cable, check if an application software using the image transfer function (such as the Scanner and Camera Wizard) is started on the computer. If started, close such application - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 84
the computer manufacturer or Microsoft. Î Your Internet provider may change the allocated IP addresses on a regular basis. You cannot connect to the remote camcorder if the IP address changed after you started DV Messenger. Please consult your Internet provider for details. 84 Troubleshooting - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 85
is started. End DV Messenger first. DV Messenger Uninstallation I have uninstalled DV Messenger, but [DV Network Software] is still listed in the [Add or Remove Programs] window. Î In the [Add or Remove Programs] window, select [DV Network Software] and click [Change/Remove]. Troubleshooting 85 - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 86
Canon USB Video Driver The Canon camcorder is connected to the computer via USB cable, but is not recognized by the computer. Î Check if the camcorder is set to NETWORK mode. Î Check if the USB cable is correctly connected. Î The driver is not correctly installed. Uninstall ( 71) and reinstall ( 19) - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 87
files. Î The driver files were not correctly installed to the computer. Insert the CD- ROM and reinstall the files to the computer. Downloading Canon Camera Storage Device is not recognized. Î The memory card cover is open. Disconnect the DV cable from the camcorder, close the memory card cover, and - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 88
2 Click [Performance and Maintenance]. 3 Click [System]. 4 Click the [Hardware] tab on the [System Properties]. 5 Click the [Device Manager] button. 88 Troubleshooting - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 89
on your camcorder model, [Canon USB Video Record] may not be displayed. In such case, delete [Canon USB Video] and [Canon USB Video Control]. 2. In the confirmation dialog, click [OK] and close [System Properties] and [Device Manager]. Remove all copies of the [Canon Camera Storage Device - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 90
the [start] menu, select [My Computer] and doubleclick the [C:], [WINDOWS] and [INF] folders in succession. If the [INF] Folder Is Not Visible in the [WINDOWS] Folder Use the following procedures to show [Hide extensions for known file types] is selected, remove its check mark. 90 Troubleshooting - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 91
"Oem". • The Windows Notepad program will start and show the file contents. When uninstalling the USB Video Driver, click each [Oem*] file until you find the one that contains [; Canon USB Video Driver] in its first line. When uninstalling the AV/C Camera Storage Subunit-WIA Driver, click each [Oem - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 92
windows and restart the computer. The uninstall process is complete. The [Inf] folder contains numerous files that are critical to the computer's operation. Be extremely careful not to delete the wrong files. If you delete the wrong file, you may be unable to restart Windows. 92 Troubleshooting - Canon ZR200 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 93
Customer Care Center Tel (US): 1-800-828-4040 (Mon.-Fri., 9 AM to 8 PM Eastern Time) CANADA -------- Canon CANADA Inc. Tel (Canada): 1-800-OK-CANON (1-800-652-2666) ASIA Canon Hongkong Co., Ltd. 19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong Phone: 852-2170-2828 Fax
E
Version 2
DV Network Software
Instruction Manual
This software is for use with Windows® XP only.