Canon ZR200 DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 11

System Requirements OS: Microsoft Windows XP Home Edition or Professional (Installation of Service Pack 1 recommended) E Proper operation is not guaranteed on Windows XP that has been upgraded from a previous version. CPU: Pentium 500 MHz or better (800 MHz or better recommended) RAM: 128 MB or more (256 MB or more recommended) Interface: USB (1.1/2.0) or IEEE1394 (OHCI compliant) Free Hard Disk Space: • DV Messenger: 100 MB or more • Canon USB Video Driver: 1 MB or more • AV/C Camera Storage Subunit-WIA Driver: 1 MB or more Display: 800 u 600 pixels/High Color (16 bit) or better Others: Windows Messenger Version 4.5, 4.6 or 4.7, sound function, Internet connection* * Using a standard dial-up connection is possible, but we recommend using a broadband connection to the Internet. System Requirements for Capturing/Recording Movies Using an Editing Software: OS: CPU: Interface: USB Cable: Microsoft Windows XP Home Edition or Professional (Installation of Service Pack 1 or 2 required) Proper operation is not guaranteed on Windows XP that has been upgraded from a previous version. Pentium4 1.3 GHz or better, or Pentium M 1.0 GHz or better, or Celeron 2.0 GHz or better Preinstalled Hi-Speed USB 2.0 Supplied USB Cable  Proper operation is not guaranteed on a dual CPU PC or on a user-built PC.  Proper operation is not guaranteed on any particular system, even if it meets the requirements outlined above.  Do not connect two or more camcorders to the computer at the same time. The connection may not work correctly.  A CD-ROM drive is required to install the software. USB connection:  Connect the USB cable directly to one of the computer's main USB ports. The interface may not function correctly if the camcorder is connected via a USB hub.  The connection may not operate correctly if you are using other USB devices, excluding USB mice or keyboards, at the same time. If this occurs, disconnect the other devices from the computer and try reconnecting the camcorder.  Not all operations performed with a connection to a USB 2.0 compatible board can be guaranteed. DV (IEEE1394) connection:  Connect the camcorder directly to the computer using a DV (IEEE1394) cable. The connection may not operate correctly if the camcorder is connected via a repeater or other IEEE1394 devices, or if more than one IEEE1394 device is connected to the computer.  Do not connect another IEEE1394 device while the AV/C Camera Storage Subunit-WIA Driver is operating. The connection may not operate correctly. System Requirements 11