Canon iPF650 iPF650 User Manual - Page 583

Network Setting Conguring the IP Address Using ARP and PING Commands This topic describes how to congure the IP address using ARP and PING commands. To use the ARP and PING commands, you will need to know the printer's MAC address. You can conrm the MAC address on the Control Panel. 1. Check the printer's MAC address. You can conrm the MAC address on the Control Panel as follows: 1. On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Settings/Adj. tab ( ). 2. Press the OK button. The Set./Adj. Menu is displayed. 3. Press ▲ or ▼ to select Interface Setup, and then press the OK button. 4. Press ▲ or ▼ to select Ethernet Driver, and then press the OK button. 5. Press ▲ or ▼ to select MAC Address, and then press the OK button. Note • If the Tab Selection screen is not displayed, press the Menu button. • You can investigate the MAC address by printing an interface setting report. (→P.65) 2. In Windows, open a command prompt, or in Mac OS X, start Terminal. 3. Execute the following command to add entries to the ARP table for managing IP addresses and corresponding MAC addresses. arp -s [IP address] [the printer's MAC address you have veried] Example: arp -s xxx.xxx.xxx.xxx 00-1E-8F-xx-xx-xx Note • In Mac OS X when using Terminal, enter the arp command in the format "arp -s xxx.xxx.xxx.xxx 00:1E:8F:xx:xx:xx." For details, refer to the help le for the command line. 4. Execute the following command to send the IP address to the printer and congure it. ping [IP address as specied in the ARP command] -l 479 Example: ping xxx.xxx.xxx.xxx -l 479 Note • In "-l," the "l" is the letter "l". • In Mac OS X when using Terminal, enter the ping command in the format "ping -s 479 xxx.xxx.xxx.xxx." For details, refer to the help le for the command line. Network Setting 567