Canon iPF650 iPF650 User Manual - Page 684

The printer stops during a print job The printer stops during a print job An error message is shown on the Display Screen Status An error message is displayed during printing. Corrective Action Check the error message and take action as necessary. (See "Error Messages.") The last portion of roll paper was used during a print job, and paper could not be advanced because the trailing edge is taped to the roll. Remove the used roll and insert a new roll. (→P.116) (→P.118) (→P.79) The printer ejects blank, unprinted paper Status The leading edge of the roll paper was cut to straighten it. Corrective Action The leading edge of rolls may be cut to straighten it if you have selected Trim Edge First > On or Automatic in the Control Panel menu. (→P.133) The Printhead nozzles are clogged. Print a test pattern to check the nozzles and make sure the Printhead is in good condition for printing. (→P.630) A print job was received from an incompatible printer Use the correct imagePROGRAF printer driver for driver. the printer and try printing again. The printer has received print data that includes HP RTL commands when Auto Rotate is On in the Control Panel menu. In the Control Panel, set Auto Rotate to Off and print again. (→P.49) The printer is damaged. Contact your Canon dealer for assistance. The printer stops when printing a HP-GL/2 job (the carriage stops moving) Cause The printer is analyzing the print job. Corrective Action Please wait a while until printing is nished. A job was printed when Input Resolution in the Control Panel menu was set to 600dpi. In the Control Panel menu, set Input Resolution to 300dpi and print again. (→P.49) 668 Troubleshooting