Canon iPF650 iPF650 User Manual - Page 74

Control Panel System Setup Setting Item Keep Paper Size TrimEdge Reload Rep.P.head Print Nozzle Check Use RemoteUI Reset PaprSetngs Prep.MovePrinter Admin. Change Password Menu 58 Printer Parts Description, Instructions Choose Off to give priority to margin settings. The larger value is used if the margin specied in the printer driver does not match the margin in the printer menu Specify whether to trim the leading edge of the currently retracted roll when the roll is advanced. Cut the edge if you are concerned about any marks left on the roll when the roll is left in the retracted position. Specify On to have rolls cut when printing begins after Sleep mode or when the power is restored. Selecting Automatic will trim the edge when the roll has been in the retracted position for two days or more. Choose On to have the printer automatically execute the Advanced Adj. operations after you replace the Printhead. (→P.604) In Frequency, specify the timing for automatic checks of nozzle clogging. Choose Standard to have the printer adjust the timing for checks based on the frequency of nozzle use. Choose 1 page to check once per page. Select Warning > On to display warnings if the nozzles clog during printing. Choosing Off prohibits access from RemoteUI. Settings can only be congured from the control panel. Restores settings that you have changed with Media Conguration Tool to the default values. Select this option when transferring the printer to another location. Follow the instructions displayed to complete the required procedure. (→P.651) Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low. By setting a password, you can restrict menu display and conguration as follows. You can input between 0 and 9999999. • Viewing and conguration by administrators only IPv4 Settings Change Password Init.Admin.Pswd