Canon iPF650 iPF650 User Manual - Page 593

Network Setting Specifying Printer-Related Information Specify device information, security, and email notication settings as follows. 1. Start the web browser and enter the following URL in the Location (or Address) box to display the RemoteUI page. http://"printer IP address or name"/ Example: http://xxx.xxx.xxx.xxx/ 2. Select Administrator Mode and click Logon. 3. If a password has been set on the printer, enter the password. 4. Click Information in the Device Manager menu at left to display the Information page. 5. To display the relevant settings page, click Edit in the upper-right corner of Device Information or Security, depending on what information you want to specify. To change the administrator password, click the Change Password button in the Security group. 6. Refer to the table of settings for device information, security, and email notication as you complete these settings. Security setting items are displayed when you click the Change Password button in the Security group. Device Information Settings Item Device Name Location Administrator Phone Comments(E-mail) Details Enter a device name. (0-32 characters) blank Enter the location where the device is installed. (0-32 characters) blank Enter the administrator's name. blank (0-32 characters) Enter the administrator's contact blank information. (0-32 characters) Enter any comments regarding the administrator. (0-32 characters) blank Default Setting Security Settings Item New Password Details Enter the new password. (0-9999999) Default Setting blank Conrm Enter the new password again to blank conrm it. (0-9999999) On the Security settings screen, besides entering a password, you can specify other security-related information, such as IP address-based SNMP or TCP usage restrictions, MAC address-based access restrictions, or IPP and FTP authentication settings. 7. Click OK to activate the settings. Network Setting 577