Canon iPF650 iPF650 User Manual - Page 710

Messages regarding paper Insufcient paper for job Cause The printer has received a print job longer than the amount of roll paper left when ManageRemainRoll in the Control Panel menu is On. Corrective Action Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, the roll paper may run out during the print job and you may not be able to print all of the document. Press ▲ or ▼ to select Change Paper, and then press the OK button to stop printing. Either change the printer driver Paper Source setting or the GL2 Settings > Paper Source setting in the printer menu or replace the roll with a roll that has enough paper for the print job, and then try printing again. (→P.116) (→P.106) This paper cannot be used. Cause Paper smaller than the printer's minimum supported size has been loaded. Corrective Action Push the Release Lever back and load paper of the correct size. (→P.101) Paper has been loaded that is too small to print the test pattern for printhead adjustment or nozzle checking. Push the Release Lever back and load unused paper of A4 size or larger. More than one sheet may be required depending on the adjustment. Roll printing is selected. Cause You have attempted to print a test print sheet or other printer status information on a roll, but no roll is loaded. Corrective Action Press ▲ or ▼ to select Load Roll Paper, and then press the OK button. Load the roll, and then print. (→P.103) (→P.106) To print on sheets, follow these steps. 1.Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing. 2.Load a sheet and try printing again. (→P.82) 694 Error Message