Canon iPF650 iPF650 User Manual - Page 711

Messages regarding paper Roll printing is selected, but sheets are loaded. Cause A print job for rolls was received when a sheet is loaded. Corrective Action Follow these steps to load and print on a roll. 1.Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the sheet. (→P.144) 2.Load a new roll. (→P.106) The printer now starts printing the print job. Press ▲ or ▼ to select Stop Printing, and then press the OK button. The roll is empty. The roll is empty. Cause There is remaining roll paper, but because it could not be advanced, it could not be detected. Corrective Action Follow these steps to replace the used roll with a new roll of the same type and size. 1.Press the Release Lever back and remove the roll. (→P.116) (→P.118) 2.Load the new roll. (→P.103) (→P.106) 3.If no barcode was printed on the roll, specify the type of paper. (→P.110) 4.When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printed on the roll, also specify the paper length. (→P.112) 5.If Not nished printing. Finish printing remaining jobs? is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. Choose a higher level of Print Quality in the Advanced Settings of the printer driver. (→P.187) Error Message 695