Canon imageFORMULA DR-3010C Compact Workgroup Scanner User Manual - Page 18
Turning the Power ON, Scanner Recognition
View all Canon imageFORMULA DR-3010C Compact Workgroup Scanner manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3. Turning the Power ON When you turn the computer and the scanner ON for the first time, the Plug and Play function of Windows recognizes the scanner and automatically installs the required device driver. IMPORTANT • If you turn the power OFF, wait at least 10 seconds before turning it ON again. • If you will not be using the scanner for an extended period, you should disconnect the power cord from the AC outlet for safety. 3 Windows automatically recognizes the DR-3010C as new hardware. NOTE If you set the power switch on the back of the scanner to 'AUTO', the scanner is linked to be automatically turned ON/OFF in accordance with the power of the computer. Scanner Recognition The scanner will be recognized the first time it is connected to the computer. 1 Make sure that the scanner and computer are connected properly. 2 Press the power switch on the back of the scanner to turn the scanner ON ( setting). 18 DR-3010C