Canon imagePROGRAF TX-3000 MFP T36 series User Manual - Page 151

◦ Inward Winding Important • If the roll holder lifts up, it may cause an error. 7. Make sure Inward/Outward Winding Changeover switch on roll unit is in desired direction and press Auto Take-up/Pause button. The Pause lamp, which has been lighted up to this point, turns off, and the Auto Take-up lamp lights up instead. The winding preparation is complete. During printing, the winding starts. Before printing, the winding starts at the same time as the printing. Important • When winding inwardly, loosening of the wound paper can be prevented by pressing the roll paper with the arm. However, doing so may produce pressure traces on the paper. In this case, tap the roll unit area of the media information display area and set Paper retention setting to Release. 151