Canon imagePROGRAF TX-3000 MFP T36 series User Manual - Page 212
Auto maintenance settings
View all Canon imagePROGRAF TX-3000 MFP T36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
Auto maintenance settings Select this setting item from Device settings. Important • The administrator password is required to change settings if it is enabled for changing settings using the operation panel. • Auto nozzle check Enables/Disables automatic nozzle checking. You can also select the page interval to perform automatic nozzle checking. • Nozzle check error display Enables/Disables displaying the nozzle check error. • System cleaning frequency Specifies the frequency of automatic system cleaning. Note • To maintain print quality, we recommend you select Short if you use the printer at a higher place. • Print pattern after new head Selects whether you print an adjustment pattern after replacing the print head. 212
Auto maintenance settings
Select this setting item from
Device settings
.
Important
•
The administrator password is required to change settings if it is enabled for changing settings using
the operation panel.
•
Auto nozzle check
Enables/Disables automatic nozzle checking. You can also select the page interval to perform automatic
nozzle checking.
•
Nozzle check error display
Enables/Disables displaying the nozzle check error.
•
System cleaning frequency
Specifies the frequency of automatic system cleaning.
Note
•
To maintain print quality, we recommend you select
Short
if you use the printer at a higher place.
•
Print pattern after new head
Selects whether you print an adjustment pattern after replacing the print head.
212