Canon imagePROGRAF TX-3000 MFP T36 series User Manual - Page 211

◦ Roll paper setting 5 Select whether B2 or 20"x24" is applied when a roll of an intermediate size is detected. ◦ Roll paper setting 6 Select whether A1 or 600 mm is applied when a roll of an intermediate size is detected. ◦ Roll paper setting 7 Select whether 600 mm or 24 inch is applied when a sheet of an intermediate size is detected. • Adjust roll unit Select this setting item when you replace the roll unit. • Print advanced paper settings Tapping Yes prints out each setting specified in Advanced paper settings. • Reset paper settings for all paper Tapping Yes initializes each setting specified in Advanced paper settings. Entering the administrator password is required if it is enabled. Important • When you set the paper settings back to the factory default, added or updated paper information using Media Configuration Tool is erased. In addition, the color calibration values are also erased. Perform color calibration to specify the color calibration values. 211