Canon imagePROGRAF TX-3000 MFP T36 series User Manual - Page 382

Adjusting Line Misalignment If printed lines are misaligned, execute Print head angle adjustment to adjust the print head angle. Print head angle adjustment requires you to examine a printed test pattern and adjust the angle using the angle adjustment lever. Always adjust the print head angle after replacing the print head. Note • We recommend using the type of paper you use most often for adjustment. Paper to Prepare When using rolls An unused roll at least 10.00 inches (254.0 mm) wide When using sheets One sheet of unused paper of at least A4/Letter size Perform adjustment as follows. 1. Load paper. Loading Rolls on the Roll Holder Loading the Upper Roll on the Printer Loading the Lower Roll on the Roll Unit (Option) Loading Sheets in the Printer Important • Always make sure the loaded paper matches the type of paper specified on the printer. Adjustment cannot be completed correctly unless the loaded paper matches the settings. 2. Tap Maintenance on HOME screen. Touch Screen The Maintenance screen appears. 3. Tap Print head angle adjustment. A confirmation message appears. 4. Tap Yes. The carriage moves and the guidance for the print head angle adjustment procedure appears on the touch screen. 5. Open the top cover. 382