Canon imagePROGRAF TX-3000 MFP T36 series User Manual - Page 769

Check 7 Low Print Quality setting causing lines in the printing Follow the steps below to set Print Quality to High, and then print. • Windows Change the Print Quality settings in the printer driver Advanced Settings. Changing the Print Quality and Correcting Image Data (Windows) • macOS Change the Print Quality in the printer driver Quality & Media settings. Changing the Print Quality and Correcting Image Data (macOS) When Fast or Standard is selected, the printing time is shorter and less ink is used than with Highest or High, but the print quality is reduced. Check 8 Is the media type specified in the printer driver the same as the media type loaded in the printer? Load paper of the same type as you have specified in the printer driver. Loading the Upper Roll on the Printer Loading the Lower Roll on the Roll Unit (Option) Loading Sheets in the Printer Follow the steps below to change the printer driver settings. 1. To stop printing, press the Stop button. 2. Change the type of paper in the printer driver and try printing again. Check 9 Make sure that lines are not printed around 100 mm from the paper edges. If the printer is on standby or if you leave paper as it is for approximately over 30 minutes, paper may be curled or wrinkled. Set Sleep timer on Energy saving settings to a value shorter than 30 minutes, so that you can prevent paper from being curled or wrinkled. Device user settings 769