Canon imagePROGRAF TX-3000 MFP T36 series User Manual - Page 351

Reconfiguration Method of LAN Connection/Reconfiguration Method of Wireless LAN Connection Changing LAN Connection Method Changing Wireless LAN Connection Method Changing LAN Connection Method Follow either procedure below to change LAN connection method (wired or wireless). • For Windows: ◦ Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup. ◦ Tap LAN settings and Change LAN in this order on the HOME screen, and then select Activate wireless LAN or Activate wired LAN. After that, perform settings on the Network Settings screen on IJ Network Device Setup Utility. For details, refer to Performing/Changing Wireless LAN Settings or Performing/Changing Wired LAN Settings. • For macOS: Follow the instructions on the Canon website to redo setup. Changing Wireless LAN Connection Method Follow either procedure below to change wireless LAN connection method (infrastructure or wireless direct). • For Windows: ◦ Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup. ◦ Perform settings on the Network Settings screen on IJ Network Device Setup Utility. Important • Before you perform settings using IJ Network Device Setup Utility, turn on easy wireless connect mode on the printer following the procedure below. 1. Make sure printer is turned on. 2. Flick HOME screen and tap LAN settings. Menu Operations If you specify the administrator password, enter the password. 3. Tap Wireless LAN setup. 4. Tap Easy wireless connect. 5. Check message and tap OK. Follow instructions on your smartphone or tablet. 6. If message saying setup is completed appears, tap OK. 351