Canon imagePROGRAF TX-3000 MFP T36 series User Manual - Page 204
Enable/disable WSD
View all Canon imagePROGRAF TX-3000 MFP T36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows 8.1, and Windows 7). ■ Enable/disable WSD Selects whether WSD is enabled or disabled. Note • When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows 10, Windows 8.1, and Windows 7. ■ Optimize inbound WSD Selecting Enable allows you to receive the WSD printing data faster. ■ Timeout setting Specifies the timeout length. ◦ Bonjour settings Setting items for LAN using Bonjour for macOS. ■ Enable/disable Bonjour Selecting Enable allows you to use Bonjour to perform the network settings. ■ Service name Specifies the Bonjour service name. You can use up to 48 characters for the name. Note • You cannot use the same service name as that already used for other LAN connected devices. ◦ IEEE802.1X settings Performs various settings for IEEE802.1.X. ◦ SNTP settings Performs various settings for SNTP (Simple Network Time Protocol). ◦ Spanning tree setting Enables/Disables spanning tree. Selecting Enable avoids circulating data on a network. ◦ LPR protocol setting Enables/Disables the LPR setting. ◦ RAW protocol Enables/Disables RAW printing. ◦ LLMNR Enables/Disables LLMNR (Link-Local Multicast Name Resolution). Selecting Active allows the printer to detect printer's IP address from the printer name without a DNS server. ◦ Gigabit Ethernet settings Specifies the communication speed and communication method when using Gigabit Ethernet. ◦ Use Dedicated Port 204