Canon imagePROGRAF iPF825 MFP M40 iPF815/iPF825 Basic Guide No.1 - Page 16
Load a roll in the Roll 2 Lower position iPF825 only
View all Canon imagePROGRAF iPF825 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Loading Rolls in the Printer Load a roll in the Roll 2 (Lower) position (iPF825 only) • Do not detach the Roll Unit in the following cases. • During printing Vibration from removing the Roll Unit may affect the printing quality. • If a sheet is loaded in the printer The sheet may be ejected, and (rarely) it may be bent. 1 Confirm that a roll is selected as the paper source. (→"Selecting the Paper Source," User Manual) OK 2 Holding the Roll Unit Lever (a), pull out the Roll Unit. 3 Holding the Roll Holder so that the side with the white gear faces the side of the Roll Holder Slot with a white gear, load the Roll Holder shaft (a) into the grooves (b) on both ends of the Roll Holder Slot. a ba a b • Be careful not to pinch your fingers between the Roll Holder shaft (a) and the guide grooves (b) when loading rolls. • See the following procedure for instructions on attaching the Roll Holder to the roll. (→ , Attaching the Roll Holder to Rolls) 16