Canon imagePROGRAF iPF825 MFP M40 iPF815/iPF825 Basic Guide No.1 - Page 44

Menu Map b Interface Setup c Auto Band Adj. Manual Band Adj Adjust Length *3 Head Inc. Adj. EOP Timer *15 TCP/IP *15 NetWare *15 AppleTalk *15 Ethernet Driver *15 Standard Adj. Advanced Adj. No Yes A:High B:Standard/Draft No Yes F IP Mode Protocol *4 IP Setting *10 NetWare Frame Type *6 Print Service *6 On Off Auto Detect Comm.Mode *7 Ethernet Type *7 Spanning Tree MAC Address No Yes No Yes No Yes No Yes Automatic Manual DHCP BOOTP RARP IP Address Subnet Mask Default G/W On Off G * On Off * On Off * On Off * 0.0.0.0~255.255.255.255 0.0.0.0~255.255.255.255 0.0.0.0~255.255.255.255 * BinderyPServer RPrinter NDSPServer * * NPrinter On * Off Half Duplex * Full Duplex 10 Base-T * 100 Base-TX Not Use * Use Maintenance System Setup Return Defaults *15 Repl. maint cart Replace P.head Repl. S. Cleaner Move Printer Warning Keep Paper Size Paper Size Basis d e *3: Available only if Feed Priority is Print Length. *4: Available only if IP Mode is Automatic. *6: Available only if NetWare is On. *7: Available only if Auto Detect is Off.  No Yes No Yes No Yes No Yes Level 1 Level 2 Level 3 Buzzer Detect Mismatch Skip Take-Up Err Off On Sht Selection 1 Sht Selection 2 F * Off On Pause Warning None Off On * G * * * ISO A3+ * 13"x19"(Super B) ISO B1 * 28"x40"(ANSI F) 10 sec. 30 sec. 1 min. 2 min. 5 min. 10 min. * 30 min. 60 min. Auto Detect Ethernet 2 * Ethernet 802.2 Ethernet 802.3 Ethernet SNAP *10: Not displayed if IP Mode is Automatic. *13: Available only on the iPF825. *15: Viewing and configuration is possible for administra- tors, and only viewing for other users. 44