Canon imagePROGRAF iPF825 MFP M40 iPF815/iPF825 Basic Guide No.1 - Page 3
Caution
View all Canon imagePROGRAF iPF825 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Caution Safety Precautions █ Printer location • Never install the printer on an unstable or vibrating surface. If it falls over, this could cause personal injury. • Never set up the printer in a location that is exposed to high humidity or large amounts of dust, or exposed to direct sunlight, high temperature, or open flame. This could cause a fire or electrical shock. Use the printer location in an environment where temperature and humidity are within the ranges of 15 °C to 30 °C (59 °F to 86 °F) and 10 to 80% RH (with no condensation). • Never place the printer on a heavy wool or shag carpet. The fibers may enter the printer and cause a fire. • Keep the area around the power outlet clear of items so that you can disconnect the power cable immediately if the printer starts operating abnormally. In the event of a printer malfunction, remove the power cable from the outlet as soon as possible to prevent fire and electrical shocks. • Do not install the printer near sources of strong electromagnetic fields, whether equipment that generates such fields or places where such fields occur. This could damage the printer or cause malfunction. █ Moving the Printer • The weights of main printer units are as follows: iPF815/iPF825: Approx. 112 kg (246.9 lb) • Moving the printer requires at least six people, one person on each side of the unit. Be careful to avoid back strain and other injuries. • When moving the printer, firmly grasp the Carrying Handles located on the bottom surface at both sides. Holding the printer at other positions is dangerous and poses a risk of injury and damage if the printer is dropped. █ Power Supply • Always grip the plug to remove the power cable from the power outlet. Pulling on the power cable could damage the cable and lead to a fire or electrical shock. • Never use an extension cord. This could cause a fire or electrical shock. • Never use any power source other than 100-120 / 220-240 V AC. This could cause a fire or electrical shock. The printer operating conditions are described below. Use the printer under the following conditions. Power supply voltage: 100-120 / 220-240 V AC Power supply frequency: 50/60 Hz █ Cleaning the Printer • Always disconnect the power cable from the outlet before cleaning the printer. If the printer is switched on accidentally, moving parts inside the printer may cause personal injuries. █ Printhead, Ink Tanks and Maintenance Cartridge • Always store consumables in a safe location out of the reach of small children. If a child licks or ingests ink accidentally, seek medical assistance immediately. • Avoid dropping or shaking Printheads, Ink Tanks, and Maintenance Cartridges. Spilled ink can stain clothing and the work area. • Never touch the electrical contacts of the Printhead after printing. The contacts become extremely hot and can cause minor burns. 3