Canon imagePROGRAF iPF825 MFP M40 iPF815/iPF825 Basic Guide No.1 - Page 8

Parts Names and functions of printer parts are as follows. iPF825 a h b i l k o qj l m p c g n d eq c t r d s g f Name Operation a Top Cover Open this cover to install the Printhead, load paper, and remove any jammed paper from inside the printer as needed. b Ejection Guide Guides printed documents as they are ejected. Open this guide when loading a roll. c Roll Holder Slot Slide the Roll Holder into this slot. d Roll Holder Load the roll on this holder. e Protective Cloth for Sheets A cloth tray that catches ejected sheets. f Paper Feed Slot When loading a roll, insert the edge of the roll paper here. You can load rolls in two positions, on the printer side in the Roll 1 (Upper) position and on the roll unit side in the Roll 2 (Lower) position. g Holder Stopper Secure rolls on the Roll Holder with this part. h Ink Tank Cover Open this cover to replace an Ink Tank. i Control Panel Use this panel to operate the printer and check the printer status. j Release Lever Releases the Paper Retainer. Lift this lever toward the front of the printer when loading paper. k Maintenance Cartridge Absorbs ink used for maintenance purposes such as head cleaning. (Replace the cartridge when it is full.) l Carrying Handles When carrying the printer, have six people hold it by these handles under both sides. m Maintenance Cartridge Cover Open this cover to replace the Maintenance Cartridge. n Stand A stand that holds the printer. Equipped with casters to facilitate moving it. o Stand L The left leg of the Stand. p Stand R The right leg of the Stand. q Leg Covers Covers for Stand L and Stand R. r Stopper Locks the Stand casters. Always release the Stopper before moving the printer. Moving the printer while the Stopper is locked may scratch the casters or the floor. s Roll Unit A unit for loading a second roll. t Roll Unit Lever Hold this lever to pull out the Roll Unit. 8