Canon imagePROGRAF iPF825 MFP M40 iPF815/iPF825 Basic Guide No.1 - Page 20
Remove the roll from the Roll 2 Lower position iPF825 only
View all Canon imagePROGRAF iPF825 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Removing the Roll from the Printer Remove the roll from the Roll 2 (Lower) position (iPF825 only) 1 Press the Load/Eject button. 2 Press ▲ or ▼ to select Remove Roll, and then press the OK button. 3 Press ▲ or ▼ to select Roll 2 (Lower), and then press the OK button. The roll can now be removed. 4 After confirming that the Online lamp is off, hold the Roll Unit Lever (a) and pull out the Roll Unit. a 5 Using both hands, rotate the Roll Holder in the direction of the arrow to rewind the roll. 6 Remove the Roll Holder from the Roll Holder Slot. • See the following procedure for instructions on removing the Roll Holder from the roll. (→"Removing the Roll Holder from Rolls," User Manual) 20
20
Removing the Roll from the Printer
See the following procedure for instructions on removing the
Roll Holder
from the roll.
•
(
→
"Removing the Roll Holder from Rolls," User Manual)
1
2
3
4
5
6
Remove the roll from the Roll 2 (Lower) position (iPF825 only)
Press the
Load/Eject
button.
Press
▲
or
▼
to select
Remove Roll
, and then press the
OK
button.
Press
▲
or
▼
to select
Roll 2 (Lower)
, and then press
the
OK
button.
After con
fi
rming that the
Online lamp
is off, hold the
Roll
Unit Lever
(a) and pull out the
Roll Unit
.
Using both hands, rotate the
Roll Holder
in the direction
of the arrow to rewind the roll.
Remove the
Roll Holder
from the
Roll Holder Slot
.
The roll can now be removed.
a