Canon imagePROGRAF iPF8300 iPF8300 User Manual ver.1.20 - Page 1059

Troubleshooting > Frequently Asked Questions > Frequently Asked Questions Frequently Asked Questions ...1041 Frequently Asked Questions This section presents frequently asked questions and answers. To view more detailed explanations, click the hyperlinks in the answer column. Question How do I print on a roll? How do I print on a sheet? How do I switch between printing on rolls and sheets? How do I change the paper type or size? How do I cut the roll paper after printing? How do I print without borders? How do I print an A4 original enlarged on A2 paper? How do I print without wasting paper? Answer When printing on rolls, after loading the roll, specify the paper type and length, both on the Control Panel and in the printer driver. ⇒"Loading and Printing on Rolls →P.3 " When printing on sheets, specify the paper type and size in the printer driver before loading the paper. ⇒"Loading and Printing on Sheets →P.6 " When you complete operations on the Control Panel to load or replace paper, the paper source is automatically switched to the selected paper. ⇒"Loading Rolls in the Printer →P.777 " ⇒"Loading Sheets in the Printer →P.802 " Specify the type and size of paper, both on the Control Panel and in the printer driver. • Specifying it in the printer driver ⇒"Specifying Paper in the Printer Driver →P.60 " • Specifying it on the Control Panel Selecting the paper type ⇒"Changing the Type of Paper →P.784 " Selecting the paper size ⇒"Specifying the Paper Length →P.785 " You can wait until ink dries before cutting the roll, and you can cut rolls at a desired position. ⇒"Specifying the Cutting Method for Rolls →P.794 " Borderless printing is possible on rolls. You can also specify borderless printing in the printer driver by adjusting the original size to match the paper size. Before borderless printing, set the blue Switch on the platen to the ● side. Borderless printing is not supported on sheets. ⇒"Borderless Printing on Paper of Equivalent Size →P.95 " ⇒"Borderless Printing by Resizing Originals to Fit the Roll Width →P.102 " ⇒"Borderless Printing at Actual Size →P.88 " ⇒"Setting the Blue Switch on the Platen →P.1063 " In the printer driver, you can adjust the original image to match the paper size or width, or you can specify enlargement or reduction before printing as desired. ⇒"Resizing Originals to Match the Paper Size →P.61 " ⇒"Resizing Originals to Fit the Roll Width →P.67 " ⇒"Resizing Originals by Entering a Scaling Value →P.73 " To conserve paper, you can specify in the printer driver to rotate originals 90 degrees or to print without top and bottom margins. ⇒"Conserving Roll Paper by Rotating Originals 90 Degrees →P.161 " ⇒"Conserving Roll Paper by Printing Originals Without Top and Bottom Margins →P.167 " 12 1041 iPF8300 Frequently Asked Questions