Canon imagePROGRAF iPF8300 iPF8300 User Manual ver.1.20 - Page 977

Network Setting > Network Setting > Specifying Printer-Related Information Follow the steps below to specify device information and security settings. 1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI page. http://printer IP address or name/ Example: http://xxx.xxx.xxx.xxx/ 2. Select Administrator Mode and click Logon. 3. If a password has been set on the printer, enter the password. 4. Click Information in the Device Manager menu at left to display the Information page. 5. To display the relevant settings page, click Edit in the upper-right corner of Device Information or Security, depending on what information you want to specify. To change the administrator password, click the Change Password button in the Security group. 6. Refer to the table of settings for device information and security as you complete these settings. Security setting items are displayed when you click the Change Password button in the Security group. Device Information Settings Item Details Default Setting Device Name Enter a device name. (0-32 characters) blank Location Enter the location where the device is installed. blank (0-32 characters) 10 Administrator Enter the administrator's name. blank (0-32 characters) Phone Enter the administrator's contact information. (0-32 characters) blank Comments(E-mail) Enter any comments regarding the administrator. blank (0-32 characters) Security Settings Item Details Default Setting New Password Enter the new password. blank (0-9999999) Confirm Enter the new password again to confirm it. blank 959 (0-9999999) On the Security settings screen, besides entering a password, you can specify other security-related information, such as IP address-based SNMP or TCP usage restrictions, MAC address-based access restrictions, or IPP and FTP authentication settings. 7. Click OK to activate the settings. iPF8300 Specifying Printer-Related Information