Canon imagePROGRAF iPF8300 iPF8300 User Manual ver.1.20 - Page 934

Printer Parts > Control Panel > Set./Adj. Menu Test Print Setting Item Nozzle Check Status Print Interface Print Paper Details Print Job Log Adjust Printer Menu Map Head Posi. Adj. Auto(Standard) Auto(Advanced) Auto(Expansion) 9 Manual Feed Priority Adj. Priority Automatic Print Quality Print Length 916 Adj. Quality Auto(GenuinePpr) Menu Settings Auto(OtherPaper) Description, Instructions Print a test pattern to check the nozzles. Print information about the printer. Print interface settings information. Print the paper settings as specified in Paper Details. Print a record of print jobs, including the paper type and size, amount of ink consumed, and so on. Ink consumption indicates a rough estimate of the amount of ink consumed per print job. (*1 →P.923 ) Print the menu structure. The printer prints and reads a test pattern for automatic adjustment of Printhead alignment relative to the printing direction. (See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.839 The printer prints and reads a test pattern for automatic adjustment of Printhead alignment relative to the printing direction and spacing between nozzles and colors. (See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.839 The printer prints and reads a test pattern for automatic adjustment of Printhead alignment relative to the printing direction and spacing between nozzles and colors. Adjustment is performed at a higher level of precision than Auto(Advanced). (See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.839 Print a test pattern for adjustment of Printhead alignment relative to the printing direction. Enter the adjustment value manually based on the resulting pattern. (See "Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.841 Specify exact paper feeding, if desired. Normally, select Automatic. Choose Print Quality for attractive printing. Choosing Print Quality also makes banding less noticeable. Choose Print Length if you prefer to feed the paper an exact amount. However, note that slight banding may occur in the direction of carriage scanning when Print Length is selected. Specify this mode with paper identified in the Paper Reference Guide. The printer prints and reads a test pattern for automatic adjustment of the feed amount. (See "Automatic Banding Adjustment (Adj. Quality).") →P.846 Specify this mode with paper not in the Paper Reference Guide. iPF8300