Canon imagePROGRAF iPF8300 iPF8300 User Manual ver.1.20 - Page 718

Mac OS X Software > Media Configuration Tool > 5 Configure the following settings as necessary, and then click the Next button. Setting Automatic Cutting Settings Drying Time Borderless Printing Details Configures the method for cutting roll paper when it is ejected after printing. • Automatic Cut :Roll paper is automatically cut by the cutter unit. • Eject Cut :When the Cut key is pressed on the printer control panel, the roll paper is cut by the cutter unit. Select this if you do not want the printed material to drop immediately after printing, such as to wait for the ink to dry. • User Cut :Cutting is not performed by the cutter unit. Cut the roll paper using scissors after each sheet. Select this for paper that cannot be cut by the cutter unit. Specify the time that the printer waits for ink to dry, as needed. • Off :Ejects immediately after printing finishes. • 30 sec./1 min./3 min./5 min./10 min./30 min./60 min. :Ejects after the speci- fied time has elapsed after printing finishes. Configures whether or not to permit borderless printing. • Permit : Borderless printing is permitted. • Deny : Borderless printing is denied. 700 Add Custom Paper iPF8300