Canon imagePROGRAF iPF8300 iPF8300 User Manual ver.1.20 - Page 939

System Setup Setting Item Rep.P.head Print Nozzle Check CarriageScanWdth Use RemoteUI Reset PaprSetngs Erase HDD Data High Speed Secure High Spd. Secure Output Method Print Print (Auto Del) Save: Box 01 Print After Recv Common Box Set. Show Job Log iPF8300 Printer Parts > Control Panel > Description, Instructions Choose On to have the printer automatically execute the Advanced Adj. operations after you replace the Printhead. (See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.839 In Frequency, specify the timing for automatic checks of nozzle clogging. Choose Standard to have the printer adjust the timing for checks based on the frequency of nozzle use. Choose 1 page to check once per page. Select Warning > On to display warnings if the nozzles clog during printing. Specify the scan width of the carriage during printing. Select Automatic for movement equivalent to the width of paper loaded. Selecting Fixed will reduce any soiling on the back of the paper, although printing may take a little longer. Choosing Off prohibits access from RemoteUI. Settings can only be configured from the control panel. Restores settings that you have changed with Media Configuration Tool to the default values. Erases file management data for print job data stored on the printer's hard disk. (See "Erasing Data on the Printer's Hard Disk.") →P.938 Overwrites the entire hard disk with random data. (See "Erasing Data on the Printer's Hard Disk.") →P.938 9 Overwrites the entire hard disk with 00, FF, and ran- dom data (one time each). Verification is performed to check if the data was correctly written. (See "Erasing Data on the Printer's Hard Disk.") →P.938 Select the printing method for jobs received from software other than the printer driver. When using the printer driver, configure settings on the printer. To print as usual, select Print. Selecting Print (Auto Del) will print the job and then delete the data from the printer's hard disk. Selecting Save: Box 01 will only save the print job in the box, without printing it. A setting for jobs received from software other than the printer driver. When using the printer driver, con- figure settings on the printer. Select On to print the job after it has been saved. 921 Select Print (Auto Del) to print without saving jobs in the box shared among multiple users. Selecting Off prevents display of the log in Job Menu > Job Log. Additionally, the log is not printed if you choose Job Menu > Print Job Log. Note that because job logs are not collected, the Status Monitor accounting functions will not work correctly. Menu Settings