Canon imagePROGRAF iPF8300 iPF8300 User Manual ver.1.20 - Page 813

Paper Cutting →P.798 Handling Paper > Handling rolls > Cutting Method Choose this option if you want to cut pages by pressing Cutter Unit buttons for manual cutting after printing when Auto Cut > No is selected or Print Cut Guideline is selected in the printer driver. Otherwise choose this option if you want to cut the roll edge after loading a roll. Printer Setting Cut but- Yes ton pressed Driver Setting Auto Cut (See "Cutting Roll Paper After Printing.") →P.190 No Print Cut Guideline Note • Automatic and Eject are valid only when you have selected Auto Cut > Yes in the printer driver. • With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut. • Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the preset cutting mode. • If documents printed using Automatic, Eject, or manual cutting are short, rolls are advanced a specific amount before cutting to prevent problems with cutting and paper ejection. This may create a wider bottom margin, in some cases. Cut rolls manually in the following cases: Eject (waiting for ink to dry after printing) 7 Important • When cutting wide printed documents after ejection, have two people support the documents. If the paper drops, printed documents may be damaged. • Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the printing quality or cause rough cut edges. 1. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab ( ). 795 iPF8300 Specifying the Cutting Method for Rolls