Canon imagePROGRAF iPF8300 iPF8300 User Manual ver.1.20 - Page 1116

Error Message > Messages regarding printing or adjustment > Cause The temperature or humidity where the printer is installed is out of the acceptable range for operation. Corrective Action (See "Types of Paper.") →P.768 Press ▲ or ▼ to select Continue, and then press the OK button to continue with color calibration. However, note that correct adjustment may not be possible. Borderless printng not possible. Paper stretched or shrank. Cause The loaded roll has expanded or contracted due to environmental conditions, making it wider or narrower than the supported width for borderless printing. Corrective Action Press the OK button to stop printing. Use each type of paper only where the recommended environmental conditions are met. For details on environmental conditions for various paper, see the Paper Reference Guide. (See "Types of Paper.") →P.768 Before borderless printing, move the blue platen switch. Cause The blue Switch on the platen was set to the side opposite ● when a borderless print job was received. Corrective Action Before borderless printing, set the blue Switch on the platen to the ● side. (See "Setting the Blue Switch on the Platen.") →P.1063 13 1098 Blue platen switch is dirty. Cause The blue Switch on the platen is dirty. Corrective Action Open the Top Cover and clean the blue Switch on the platen. (See "Cleaning Inside the Top Cover.") →P.1026 Move the blue platen switch No.xx to the right. (xx represents a number) Cause The printer has detected that the blue Switch on the platen needed in maintenance during printing is set away from the ● mark. Corrective Action Set blue platen Switch of the indicated number toward the ● side. (See "Setting the Blue Switch on the Platen.") →P.1063 Cannot adjust paper feed. Cause The Printhead nozzles are clogged. Corrective Action Execute Adj. Quality again, as follows. 1. Press the OK button to clear the error. Borderless printng not possible. Paper stretched or shrank. iPF8300