Canon imagePROGRAF iPF840 MFP M40 User Guide - Page 347

iPF840 Loading Rolls in the Printer • Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the Important printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing surface. • If the paper is wrinkled or warped, straighten it out before loading it. • Load the roll so that there is no gap between the right edge of the paper and the Roll Holder. 6 Lower the Ejection Guide. Handling and Use of Paper Handling rolls 7 Close the Top Cover. 8 Press the OK button. The paper is now advanced. 9 Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and the barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.") ➔P.358 ManageRemainRoll Barcodes Printer Operation After the Paper is Fed Off Printed A menu for selection of the type of paper is shown on the Display Screen. Not prin- Press ▲ or ▼ to select the type of paper, and then press the OK button. ted On Printed The type and amount of paper left is automatically detected based on the barcode printed on the roll. There is no need to specify the type and length of the paper. Not prin- A menu for selection of the type and length of paper is shown on the Display Screen. ted Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button. 347 • Cut the edge of the roll using the Paper Cutting function if the edge is creased or soiled. (See "Specify- Important ing the Cutting Method for Rolls.") ➔P.360 User's Guide