Canon imagePROGRAF iPF840 MFP M40 User Guide - Page 551
Manual, Standard, Initial, adjustmt, Tab Selection screen, Set./Adj. Menu, Adjust Printer
View all Canon imagePROGRAF iPF840 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 551 highlights
iPF840 Automatic Adjustment to Straighten Lines and Colors • This function is not available with Tracing Paper, Translucent Matte Film, or Clear Film. Important • If adjustment is not possible as expected using special media, try another type of paper, or try Manual adjust- ment. (See "Manual Adjustment to Straighten Lines and Colors.") ➔P.552 • Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type of Note paper as you will use for printing. • If Standard does not improve printing, try adjusting the printhead manually. (See "Manual Adjustment to Straighten Lines and Colors.") ➔P.552 • If the printhead position was not adjusted during initial setup or when the printhead was replaced, execute Initial adjustmt. (See "Adjustment When Installing the Printhead.") ➔P.553 Items to Prepare When Using Rolls When Using Sheets An unused roll at least 254.0 mm (10.00 in) wide Standard : Two sheets of unused paper, A4/Letter size (or one sheet when using A3 or larger) Simple: One sheet of unused paper, A4/Letter size Perform adjustment as follows. 1 Load paper. • Attaching the Roll Holder to Rolls ➔P.342 • Loading Rolls in the Printer ➔P.345 • Loading Sheets in the Printer ➔P.369 • Always make sure the loaded paper matches the type of paper specified on the printer. Adjustment can- Important not be completed correctly unless the loaded paper matches the settings. 2 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ). Adjustments for Better Print Quality Adjusting the Printhead • If the Tab Selection screen is not displayed, press the Menu button. Note 3 Press the OK button. The Set./Adj. Menu is displayed. 4 Press ▲ or ▼ to select Adjust Printer, and then press the OK button. 5 Press ▲ or ▼ to select Head Posi. Adj., and then press the OK button. 6 Press ▲ or ▼ to select Standard or Simple, and then press the OK button. A test pattern is printed for adjustment. Adjustment is now finished if you have printed on a roll. 551 7 If you are printing on cut sheets, a confirmation message is displayed on the Display Screen asking you whether to continue printing. Press the OK button and follow the instructions on the Display Screen. User's Guide