Canon imagePROGRAF iPF840 MFP M40 User Guide - Page 450
Color CAD 6
View all Canon imagePROGRAF iPF840 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 450 highlights
Menu Settings GL2 Quality Settings Manag- er Setting Item Color Mode Color (CAD) 4 (*4) Color (CAD) 5 Color (CAD) 6 Print Quality Input Resolution Print (Economy) Paper Manager Paper Source Margin Oversize Conserve Paper Auto Rotate Control Panel Printer Menu Enlarge/Reduce Print centered Standard cut 450 Nesting Use Nesting Nesting WaitTime Cut Lines iPF840 Description, Instructions Print emulating the HP Designjet 4000/4500, in colors resembling colors produced by these printers. Print emulating the HP Designjet T1100, in colors resembling colors produced by this printer. Print emulating the Oce ColorWave 300, in colors resembling colors produced by this printer. Choose the print quality. Choose the printer input resolution, 600dpi or 300dpi. When On is selected, print using less ink. However, the quality is lower than regular printing. Select On to conserve ink such as the layout confirmation. Note that although Print (Economy) is only available when Fast is selected in Print Quality, it might not be available depending on the paper type. Choose the source of paper for HP-GL/2 printing. Specify the margin around paper. The margin for the trailing edge of sheets is 23 mm (0.9 in). However, if you have specified the leading margin in Paper Details, the larger of the setting values has priority. Set the position of the margin relative to the image range. Choose Off to set the margin inside the image range. The image may be missing depending on the layout. Choose On to set the margin outside the image range. Although the image will not be missing, you should print on paper larger than the size of the image range plus the margins. Conserves paper when printing. If the long side of an original is shorter than the roll width, the original is automatically rotated 90 degrees to conserve paper. Similarly, if the long side of an original in landscape orientation is longer than the roll width and the short side is shorter than the roll width, the original is repositioned to fit on the paper. HP RTL print jobs are not rotated. Because HP RTL images are not rotated even if the paper is rotated 90 degrees, images may be cut off or the blank paper may be ejected. In this case, set Auto Rotate to Off. Enlarge or reduce the image. Choose Specify scaling to print based on the specified scaling value. The specified range is 25 to 400 %. Choose Fit to paper to print by resizing to fit the paper loaded in the printer. If Standard cut is On, the printing is resized to fit the standard paper size. Print in the center of the paper. Automatically selects the best standard paper size from the width of the loaded roll paper and the image size and cuts the roll paper. Selecting On will store print jobs until multiple documents can be arranged to fill up the roll width, instead of printing each print job as it is received. Specify a time to wait until printing, as desired. Select On to print cut lines between each document on the roll. User's Guide