Canon imagePROGRAF iPF840 MFP M40 User Guide - Page 655
Other Messages, GARO Wxxxx (x represents a number), ERROR Exxx-xxxx (x represents a letter or number)
View all Canon imagePROGRAF iPF840 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 655 highlights
iPF840 Other Messages GARO Wxxxx (x represents a number) GARO Wxxxx (x represents a number) ...655 ERROR Exxx-xxxx (x represents a letter or number 655 Hardware error. xxxxxxxx-xxxx (x represents a letter or number 655 Top cover is open...655 Prepare for parts replacement...656 Parts replacement time has passed...656 Unknown file...656 Multi-sensor error ...656 No Roll Unit...642 GARO Wxxxx (x represents a number) Cause There is a problem with the print job. Corrective Action Try printing again, using the correct printer driver. It is also possible to continue printing in this state. However, you may not be able to obtain the desired printing results. ERROR Exxx-xxxx (x represents a letter or number) Cause Corrective Action An error requiring service may have occurred. Write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. Error Message Other Messages Hardware error. xxxxxxxx-xxxx (x represents a letter or number) Cause The last portion of roll paper was used during a print job. The paper was not advanced because the trailing edge is taped to the roll. Fastening tape or the Belt Stopper has not been removed inside the Top Cover. An error requiring service may have occurred. Corrective Action Turn off the printer and remove the roll from the printer before restoring power. Turn off the printer, open the Top Cover and remove the tape or the Belt Stopper before restoring power. Turn off the printer and wait at least three seconds before restoring the power. If the message is displayed again, write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. Top cover is open. 655 Cause The printer has detected that the Top Cover is open. Corrective Action Open the Top Cover fully, remove any foreign objects, and close the Top Cover again. If the error occurs again, close the Top Cover, turn off the printer, and wait a while before restoring power. User's Guide