Canon imagePROGRAF iPF840 MFP M40 User Guide - Page 448
Show Job Log, System Setup, Change Password, Admin. Menu, GL2 Set Print
View all Canon imagePROGRAF iPF840 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 448 highlights
Menu Settings iPF840 *3:Even if Show Job Log is Off in System Setup, it is displayed if a password is configured in Change Password in the Admin. Menu and the password has been authenticated. Set./Adj. Menu Limited items are displayed during printing. The displayed items are indicated by annotations. Test Print Setting Item Nozzle Check Status Print Description, Instructions Print a test pattern to check the nozzles. Print information about the setting values and condition of the printer. Interface Print Print interface settings information. GL2 Set Print Print the settings as specified in GL2 Settings. Paper Details Print the paper settings as specified in Paper Details. Control Panel Print Job Log Print information to match the Job Log display state. This is not printed when the Job Log is configured to not display. The maximum number of history records in models fitted with a hard disk is 32. The maximum number of history records in models not fitted with a hard disk is 10. Printer Menu Menu Map Print the menu structure. Color Palette Print the GL2 color palette. Adjust Printer Head Posi. Adj. Standard An adjustment pattern is printed and the print position is automatically adjusted to fix misaligned printing. Select Standard if vertical lines in printed material are warped or colors are out of alignment. Select Standard also if the printing results are not improved by executing Simple. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.550 Simple An adjustment pattern is printed and the print position is automatically adjusted to fix misaligned printing. Simple executes a simple adjustment in a short time. Select Simple when frequently adjusting the printhead, such as during daily maintenance. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.550 Other Initial adjustmt Printhead position adjustment is executed during the initial setup. If adjusting the printhead position has not been performed such as due to an error during initial setup or the state of the operating settings when replacing the printhead, select Initial adjustmt. (See "Adjustment When Installing the Printhead.") ➔P.553 Manual Input the setting values from the adjustment pattern printing results and adjust the printing position to fix misaligned printing. Normally, select Standard. However, when printing on special paper, or if printing is not improved after Standard, try Manual. (See "Manual Adjustment to Straighten Lines and Colors.") ➔P.552 Head Inc. Adj. Print a test pattern for adjustment of the Printhead orientation. (See "Adjusting Line Misalignment.") ➔P.554 Feed Adj. Pri- Automatic 448 Priority ority Print Quality Print Length Specify exact paper feeding, if desired. Normally, select Automatic. Choose Print Quality for attractive printing. Choosing Print Quality also makes banding less noticeable. Choose Print Length if you prefer to feed the paper an exact amount. Adj. Auto(GenuinePpr) Quality Specify this mode with paper identified in the Paper Reference Guide. (See "Displaying the Paper Reference Guide.") ➔P.335 User's Guide