Canon imagePROGRAF iPF840 MFP M40 User Guide - Page 449
B:Standard/Draft, Head Cleaning B
View all Canon imagePROGRAF iPF840 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 449 highlights
iPF840 Adjust Printer Feed Priority Setting Item Adj. Auto(GenuinePpr) Quality Auto(OtherPaper) Manual Adjust Length AdjustmentPrint A:High B:Standard/Draft Change A:High Settings B:Standard/Draft Mainte- Head Cleaning nance Nozzle Check Replace P.head Repl. maint cart GL2 Settings Head Info Quality Manager Color Mode (*4) Monochrome Color (CAD) 1 Color (CAD) 2 Color (CAD) 3 Menu Settings Description, Instructions The printer prints and reads a test pattern for automatic adjustment of the feed amount. (See "Automatic Banding Adjustment.") ➔P.559 Specify this mode with paper not in the Paper Reference Guide. (See "Displaying the Paper Reference Guide.") ➔P.335 The printer prints and reads a test pattern for automatic adjustment of the feed amount. Note that this function takes more time and consumes more ink than Auto(GenuinePpr). (See "Automatic Banding Adjustment.") ➔P.559 Use this mode with highly transparent media or other paper for which Auto(GenuinePpr) or Auto(OtherPaper) cannot be used. Print a test pattern for adjustment of the feed amount based on the type of paper. (See "Manual Banding Adjustment.") ➔P.560 Control Panel Print a test pattern for particular types of paper to compensate for paper stretching or shrinkage, after which you enter the amount of adjustment. (See "Adjusting Line Length.") ➔P.562 Printer Menu Displayed when you have selected Feed Priority > Adj. Priority > Print Length. Adjustment relative to the amount of stretching or shrinkage of the current paper. Enter either the adjustment results from AdjustmentPrint or the discrepancy that you measured (as a percentage). For paper that tends to stretch, increase the feed amount by choosing a higher adjustment value. For paper that tends to shrink, decrease the feed amount by choosing a lower adjustment value. (See "Adjusting Line Length.") ➔P.562 Clean the Printhead. (See "Cleaning the Printhead.") ➔P.578 Choose Head Cleaning A if printing is faint, oddly colored, or contains foreign substances. Choose Head Cleaning B if no ink is printed at all, or if printing is not improved by Head Cleaning A. Print a test pattern to check the nozzles. Execute when replacing the Printhead. Follow the instructions displayed to complete the required procedure. (See "Replacing the Printhead.") ➔P.579 Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low. Execute when replacing the Maintenance Cartridge. Follow the instructions displayed to complete the required procedure. (See "Replacing the Maintenance Cartridge.") ➔P.585 Indicates information about the printhead. Print in monochrome. Print in standard colors. 449 Print with approximate colors emulating Canon iPF750, iPF755, iPF650, iPF655, iPF760, iPF765. Print emulating the following printers, in colors resembling colors produced by these printers: Canon iPF500, iPF600, iPF700, iPF510, iPF610, iPF710, iPF605, iPF720, iPF810, iPF820, iPF815 and iPF825. User's Guide