Casio XJ-A240 User Manual - Page 37
Error Indicators and Warning Messages
View all Casio XJ-A240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Error Indicators and Warning Messages Warning messages and indicators let you know what the problem is when a projector error occurs. When an error occurs, wait until the fan stops before unplugging the AC power cord. If you unplug the AC power cord while the fan is still operating, an error may occur when you plug the AC power cord back in. Indicator/Error Message Description and Required Action POWER TEMP LAMP Message : Green steady :- :- : Internal temperature is too high. Check projector air vents for blockage. The projector's internal temperature is very high. Press the [ESC] key to clear the warning message and perform the following steps. Check for any blocking of the projector's intake vents and exhaust vents, and make sure that there is sufficient space around the projector. See "Setup Precautions" in the "User's Guide (Basic Operations)". If there is dust accumulated around the intake vents and/or exhaust vents, turn off the projector and remove it. See "Cleaning the Projector" (page 36). POWER TEMP LAMP Message : Amber flashing Amber steady :- :- : Internal temperature is too high. The projector will turn off. Power has turned off automatically due to internal overheating. Perform the following steps. Check for any blocking of the projector's intake vents and exhaust vents, and make sure that there is sufficient space around the projector. See "Setup Precautions" in the "User's Guide (Basic Operations)". If there is dust accumulated around the intake vents and/or exhaust vents, remove it. See "Cleaning the Projector" (page 36). If there is no problem with the projector's vents, confirm that the POWER/ STANDBY indicator is lit amber (without flashing), and then turn power back on again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. POWER TEMP : Amber flashing Red steady : Red flashing (0.5-second interval) Power has turned off automatically due to internal overheating. This causes a dialog box containing the text in the next item below to appear the next time you turn on the projector. Follow the steps that are provided. LAMP : - Message : - POWER : Green steady TEMP : - LAMP : - Message : The projector has a history of turning off due to high temperature. Check air vents for blockage. The last time you were using the projector, power turned off automatically due to internal overheating. Press the [ESC] key to clear the warning message and perform the following steps. Check for any blocking of the projector's intake vents and exhaust vents, and make sure that there is sufficient space around the projector. See "Setup Precautions" in the "User's Guide (Basic Operations)". If there is dust accumulated around the intake vents and/or exhaust vents, turn off the projector and remove it. See "Cleaning the Projector" (page 36). Disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn the projector back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. 37