Cisco 7937G Administration Guide - Page 32
Process Step, Description, Related Topics, Cisco Unified Communications Manager, - not registering
UPC - 882658165283
View all Cisco 7937G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Understanding the Conference Station Startup Process Chapter 2 Preparing to Install the Conference Station on Your Network Table 2-4 Conference Station Startup Process (continued) Process Step 5. Accessing a TFTP server 6. Requesting the configuration file 7. Contacting Cisco Unified Communications Manager Description Related Topics In addition to assigning an IP address, the DHCP server directs the conference station to a TFTP Server. If the conference station has a statically-defined IP address, you must configure the TFTP server locally on the conference station; the conference station then contacts the TFTP server directly. See the "Network Configuration Menu" section on page 4-5. See the "Resolving Startup Problems" section on page 9-2. Note You can also assign an alternative TFTP server to use instead of the one assigned by DHCP. The TFTP server has configuration files, which define parameters for connecting to Cisco Unified Communications Manager and other information for the conference station. See the "Understanding Conference Station Configuration Files" section on page 2-4. See the "Resolving Startup Problems" section on page 9-2. The configuration file defines how the conference station communicates with Cisco Unified Communications Manager and provides a conference station with its load ID. After obtaining the file from the TFTP server, the conference station attempts to make a connection to the highest priority Cisco Unified Communications Manager on the list. The conference station makes a non-secure TCP connection. See the "Resolving Startup Problems" section on page 9-2. If the conference station was manually added to the database, Cisco Unified Communications Manager identifies the conference station. If the conference station was not manually added to the database and auto-registration is enabled in Cisco Unified Communications Manager, the conference station attempts to auto-register itself in Cisco Unified Communications Manager. Note Auto-registration is disabled when security is enabled on Cisco Unified Communications Manager. In this case, the conference station must be manually added to the Cisco Unified Communications Manager. Cisco Unified IP Conference Station 7937 Administration Guide for Cisco Unified Communications Manager 6.0 2-6 OL-11560-01 Rev. B0