Cisco 7937G Administration Guide - Page 55
CallManager Configuration Menu, System, Device Pool
UPC - 882658165283
View all Cisco 7937G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 4 Configuring Settings on the Conference Station Device Configuration Menu Note You update the settings in the Device Configuration menu from Cisco Unified Communications Manager, not from the conference station. For instructions about how to access the Device Configuration menu and its sub-menus, see the "Displaying a Configuration Menu" section on page 4-2. CallManager Configuration Menu The CallManager Configuration menu contains the options CallManager 1, CallManager 2, CallManager 3, CallManager 4, and CallManager 5. These options show the servers that are available for processing calls from the conference station, in prioritized order. To change these options, use Cisco Unified Communications Manager Administration. For an available server, an option on the CallManager Configuration menu will show the server IP address or name and one of the states shown in Table 4-4. Table 4-4 State Active Standby Blank Cisco Unified Communications Manager Server States Description Cisco Unified Communications Manager server from which the conference station is currently receiving call-processing services Cisco Unified Communications Manager server to which the conference station switches if the current server becomes unavailable No current connection to this Cisco Unified Communications Manager server An option may also display one or more of the designations shown in Table 4-5. Table 4-5 Cisco Unified Communications Manager Server Designations Designation SRST TFTP Description Indicates a Survivable Remote Site Telephony router capable of providing Cisco Unified Communications Manager functionality with a limited feature set. This router assumes control of call processing if all other Cisco Unified Communications Manager servers become unreachable. The SRST Cisco Unified Communications Manager always appears last in the list of servers, even if it is active. You configure an SRST router address in the Cisco Unified Communications Manager Administration SRST Reference Configuration page (choose System > SRST). You configure an SRST reference in the Device Pool Configuration page (choose System > Device Pool). Indicates that the conference station was unable to register with a Cisco Unified Communications Manager listed in its configuration file and that it registered with the TFTP server instead. Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0 OL-11560-01 Rev. B0 4-9