Cisco ASR1002 Installation Guide - Page 6

Cisco ASR 1002 Router Description Chapter 8 Cisco ASR 1002 Router Overview and Installation Figure 8-5 shows the LEDs on the Cisco ASR1000-ESP10. Figure 8-5 Cisco ASR1000-ESP10 LEDs 12 PWR ACTV STAT STBY ASR1000-ESP10 280080 34 Table 8-1 describes the Cisco ASR1000-ESP5 and Cisco ASR1000-ESP10 LEDs. Table 8-1 Cisco ASR1000-ESP5 and Cisco ASR1000-ESP10 LEDs No. LED Label LED 1 PWR Power 2 ACTV 3 STAT Active STATUS 4 STBY Standby Color Solid green Off Green Green Yellow Red None Behavior in the Power-Up State All power supplies are within operational limits. Off, the router is in standby mode. The embedded services processor is green when active. Code has successfully downloaded and is operational. BOOT ROM has successfully loaded. Not booted. Will always be off. Note The Cisco ASR 1000-ESP5 can only be used in the Cisco ASR 1002 Router. Power Supplies in the Cisco ASR 1002 Router The Cisco ASR 1002 Router power supply module supports the following Cisco power supplies: • AC power supply operates between 85VAC to 264VAC and DC operates between -40.5 to -72VDC • -48 VDC power supply operates between • +24 VDC power supply operates Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide 8-6 OL-13208-09